3 ms·
To be even more pedantic, floppy disks as a medium don’t technically contain any particular number of bytes. You can low-level format them to different compromi
by derefr 8y ago
To be even more pedantic, floppy disks as a medium don’t technically contain any particular number of bytes. You can low-level format them to different compromises between flux density and error rate, which can be fine if the file type you’re recording has inbuilt error-correction.
Even without doing that, though, different low-level formats can also have more or less overhead. Some might use sector headers and sector trailers, while others might only use one or the other. Some might leave a decent gap between sectors, while others pack them as tightly as possible and expect the hardware to “miss” and have to “go back” to find the new sector header whenever it passes a sector boundary.
And all this type of stuff can be entirely software-controlled, in older machines. Much of the DRM of the 80s was about rewriting the floppy-disk “driver” built into the DOS of a floppy disk such that the disk was formatted normally for just enough of the disk to load that driver, and then the rest of the disk switched to a special proprietary low-level format that disk copiers couldn’t read, but the disk’s loaded DOS RWTS could.
In essence, a floppy disk is an analogue format with an analogue read/write head, that just happens to present a digital signalling protocol to the rest of the machine. (But the timing at which you start/stop movements of the disk read/write head is analogue; and you can repeatedly “sample” the same sector to probabilistically read it; so you can still get away with a lot despite the inability to just read the actual flux amplitudes off the disk.)