11 ms·
> Most of the US freight rail system isn't electrified because the capital expenditures of doing so would be very large, and its return on investment in terms o
by jcranmer 8y ago
> Most of the US freight rail system isn't electrified because the capital expenditures of doing so would be very large, and its return on investment in terms of direct monetary savings wouldn't materialize for many, many years.
There's a decent amount of mainline freight rail that was electrified 100 years ago but has since been ripped out. It turns out that electrification has a lot of operational constraints that make it a less-clearly-good proposition.
One obvious constraint is loading gauge issues--you need about another 2 feet of clearance for the wires. And if one bridge or tunnel along your entire route isn't high enough, you can't move along the double-stacked containers. You also need a lot of infrastructure for the tractive power substations, and if you don't have enough of them, you literally can't run more trains if the traffic demands it (and too many means infrastructure costs you're not benefiting from). The operational inflexibilities of electric locomotives in partially-electrified systems should have course be obvious.
That said, there are substantial benefits to having electric motors driving your wheels... which is why virtually all diesel locomotives are actually diesel-electric locomotives: electric locomotives that use a diesel generator onboard rather than hooking up to electrical catenary or third rail.
- WalterBright 8y agoOne possibility is a diesel-electric locomotive that also has a pickup on the top. That way part of the lines can be electrified, and the diesel fills in the gaps.
- rwh86 8y agoBatteries are now a viable option. They can pull power from the overhead lines or third rail when available and run on batteries when power isn't available. The LiFePO4 batteries are a drop-in replacement for existing diesel generators, so producing them is easy. https://www.youtube.com/watch?v=9s4heZe7ChM https://www.youtube.com/watch?v=9s4heZe7ChM
- stickfigure 8y agoFor a single small passenger car without any grade, maybe. From that video: 90kw/hr of battery. At peak power output of 180kw, you could run that for 30 minutes. The ubiquitous GE Dash-9 used in freight service here in the US generates >3000kw and can run all day. They're also usually run in multiples to pull long heavy trains. I wouldn't expect to see battery powered trains in the US anytime soon, except maybe short passenger-only lines on the east coast (which are probably viable for electrification anyway).
- Robotbeat 8y agoYou, strangely, ignored the parent's point that you would just be using the batteries to reduce the amount of overhead wires you need, i.e. one would have opportunity to recharge several times a day. (It's not helpful to focus on the specifics of a proof of concept--unimportant in this discussion about what is feasible--versus the fundamental figures of merit of the technology... Unless one is prepared to make the case that the specifics are the limits of the technology.) There are 100MW power, 100MWh energy lithium ion batteries installed already (with 1GWh on the way). There's no technical reason you couldn't have battery powered trains. The "batteries are too weak" argument is dead.
- creato 8y agoCan you even transfer close to 3000 kW through any overhead wires or third rail systems? It seems like 25 kV is the max voltage overhead lines run at. That's 120 A that you need to transfer through a sliding conductor. That sounds problematic to me, but I don't really know for sure...? And if you are proposing using batteries to reduce the amount of overhead wires you need, then the average power you need to transfer while connected to the wires increases, not decreases.
- anticensor 8y agoI have also thought of that. For example, a 10MW locomotive with CAT C32 as a backup diesel would be a good freight combo. CAT C32 has an intermittent duty rating of 1800hp@2100rpm and continuous duty rating of 1350hp@1800rpm. You would still have more than 1MW of power in tracks without OHLE.
- Gibbon1 8y agoThing that solves those issues are battery powered locomotives. This idea generally invites disbelief but when you run the numbers it works because the power to weight requirements drop as vehicles get larger. The result you can use overhead lines where safe, cheap and convenient and avoid them where they are not, like rail switching yards. https://www.railjournal.com/regions/north-america/bnsf-and-ge-to-trial-battery-electric-locomotive-in-california/ https://www.railjournal.com/regions/north-america/bnsf-and-g...
- Robotbeat 8y agoIt's crazy to me that people still scoff at the idea of batteries being a serious power source for things, but you're right, they do, even though there are 100MWh batteries deployed already with 1GWh batteries being approved and nearing deployment.
- stickfigure 8y agoThe experimental locomotive discussed in that link has 2400kwh of battery (probably significantly less in practice; you don't want full discharges). The diesel-electric locomotives they'll be working with generate about 3,000kw for as many hours as they have fuel in the tank. Maybe (hopefully) batteries will get better, but I wouldn't go dumping my money into electric locomotive startups just yet.
- sgift 8y agoYou don't need power for the whole trip. If most of it can be electrified with wire and you only have small patches which cannot (like the tunnel mentioned) current battery technology is up to the task. We will introduce that here in the near future for a new tram line going through a park (where we don't want overhead wires).
- masklinn 8y agoThe point they were making is that the train would go on batteries for the bits of the route which can't be electrified (e.g. too low tunnels), the track would otherwise be normally electrified, the battery would only be necessary to cross between electrified sections of the track. Similar to the battery-equipped dual-mode trolleybuses increasingly getting developed / deployed[0] allowing both point-charging at stops and more independence from overhead line (so trolleys can more easily be rerouted, or can serve increasingly longer sections without overhead lines). [0] they've existed since the 30s but mostly electric / ICE
- niftich 8y agoPeak electrification in the US was in the 1930s and began falling in the 40s, but the Class I railroad route miles were almost 2.5x that of today. Electrification generally came about to reduce the impacts of steam traction (e.g. in cities and tunnels), to gain more power on grades, or to reduce the opex on high-traffic routes vs. steam. In the decades after WW2, diesel-electric propulsion boomed, viable again after wartime shortages were over, simpler to maintain than steam, and more flexible than electric. This was well before double-stack trains got started in the 80s, but now that double-stack is widespread in the US, overhead electrification does present another operational hurdle.
- thomasmg 8y agoLonger term, Hydrail [1] (Hydrogen) might replace Diesel-electric. I guess this will start with cities, where pollution is a problem. [1] https://en.wikipedia.org/wiki/Hydrail https://en.wikipedia.org/wiki/Hydrail