2 ms·
Ah, so that indicator would have been abnormally in the "nose down" area after MCAS over adjusted it. Interesting. Information overload, and nobody looked bec
by tyingq 8y ago
Ah, so that indicator would have been abnormally in the "nose down" area after MCAS over adjusted it. Interesting. Information overload, and nobody looked because that amount of auto adjustment wasn't anticipated. And also means they didn't correlate the fairly noisy/visual turning off the wheels to get it in that position.
- DougBTX 8y agoThere was a PDF incident report going around earlier with a chart showing a graph of the inputs from MCAS and the pilots over a period of time. There was a "nose down" command from MCAS, followed by a "nose up" command from the pilot, then a "nose down" command from MCAS, a "nose up" command from the pilot... repeated about 20 times in a row...
- mhandley 8y agoThe full preliminary report from the LionAir crash is here: https://www.flightradar24.com/blog/wp-content/uploads/2018/10/2018-035-PK-LQP-Preliminary-Report.pdf https://www.flightradar24.com/blog/wp-content/uploads/2018/1... I've put the relevant figure showing the trim adjustments here: http://nrg.cs.ucl.ac.uk/mjh/lionair.png http://nrg.cs.ucl.ac.uk/mjh/lionair.png
- tyingq 8y agoYes, right, they would have had to figure out they needed to hold the wheel to keep it from auto-adjusting. Which wouldn't be real intuitive if you didn't know MCAS existed. Though holding the wheel is supposedly part of the normal runaway stabilizer trim checklist.