3 ms·
What's even worse is that a runway trim could be disabled by pulling hard on the yoke which would disable the autopilot driving the trim wheel motors. Then the
by userbinator 8y ago
What's even worse is that a runway trim could be disabled by pulling hard on the yoke which would disable the autopilot driving the trim wheel motors. Then the wheels could manually be brought into position.
Not if the runaway is caused by a stuck trim switch --- which is why there are the cutout switches and the procedure for runaway trim involves using them. Finally, if that doesn't work, manually grasp and hold the trim wheels:
https://www.youtube.com/watch?v=cQirIH_DuAs https://www.youtube.com/watch?v=cQirIH_DuAs
(...and if that doesn't work, there's a big mechanical problem which is unlikely to be recoverable, since the trim wheels are directly linked to the stabilizer.)
- ddalex 8y ago> Finally, if that doesn't work, manually grasp and hold the trim wheels You might think of grabbing and holding the wheels is there is a continuous movement there looking like an automated system going haywire. But with MCAS, it's not. It appears that the trim wheels move in short bursts in random movements, which they ALWAYS do. There is simply no reason to suspect that the wheels move in a single direction (pointing the nose down), unless you can visually see them. Which you can't because they're beneath and behind the pilot seat.