4 ms·
What do people think about the recommended sensor? Is it reasonably accurate? Are there better alternatives?
by gpm 8y ago
What do people think about the recommended sensor?
Is it reasonably accurate? Are there better alternatives?
- gpm 8y agoFor anyone else who goes looking for the datasheet - the link from the shop is broken but is saved in the wayback machine. https://web.archive.org/web/20180130060734/https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BME680-DS001-00.pdf https://web.archive.org/web/20180130060734/https://ae-bst.re...
- deleted 8y ago[deleted]
- gpm 8y agoSomeone replied with this interesting and then deleted their comment. It doesn't include the same sensor, but it does include a related one and it's a wonderfully detailed analysis: Thank you for linking it! https://www.kandrsmith.org/RJS/Misc/Hygrometers/calib_many.html https://www.kandrsmith.org/RJS/Misc/Hygrometers/calib_many.h...
- peferron 8y agoThe sensor doesn't appear to measure particulate matter, so I'd take the air quality reading with a large grain of salt.
- gpm 8y agoAgreed - it's pretty explicitly just a volatile organic compound (gas) detector. On the other hand VOCs, especially as a proxy for CO2 and air circulation, are also interesting.
- ekianjo 8y agoIt does not even measure Ozone concentration which is one of the key things you would want to look at for air quality...
- flo123456 8y agoTo add on that, if you want to measure particulate matter take an SDS11 and have a look at https://luftdaten.info https://luftdaten.info
- retSava 8y agoSince indoor air quality/IAQ is a composite metric, I'd say that some of the interesting things to measure are: PM2.5/PM10 - particles from combustion, exhaust, traffic (wheels against asphalt) etc CO, NOx - from traffic exhaust CO2 - from humans VOC - volatile organic compounds, IIRC correlated with cancer and lots of unpleasant stuff. Comes mostly from paint and manufactured stuff (furniture etc) at home. I'm about to make a small sensor thingee that measures these plus relative humidity (too dry at home, 30--50% should be good, we're at 10-15%), temperature (16-20 when sleeping), and for fun barometric pressure, ambient light. For this I'm going to use a Honeywell HPMA-115S0, and IIRC BME680 and some other stuff. If interesting I can have a closer look. Battery-operated devices are a little bit of a challenge since often some of these sensors internally use a heating element for a long duration, so they consume quite a lot of power. The Plantower looks interesting, thanks for the link.