3 ms·
If you want to build a really cheap drone that can actually do autonomous GPS-guided stuff, the Kakute F7 can be flashed with Arducopter (Arudpilot), and is $49
by walrus01 8y ago
If you want to build a really cheap drone that can actually do autonomous GPS-guided stuff, the Kakute F7 can be flashed with Arducopter (Arudpilot), and is $49 with a power distribution board. Mostly intended for small racing drones, but can be used for other purposes.
https://www.getfpv.com/holybro-kakute-f7-aio-flight-controller.html https://www.getfpv.com/holybro-kakute-f7-aio-flight-controll...
https://shop.holybro.com/c/kakute-f7_0486 https://shop.holybro.com/c/kakute-f7_0486
Or you can get the version that combines a four motor ESC in a stack with the version of the Kakute F7 that doesn't have a built in PDB (power distribution board), for under $120.
https://shop.holybro.com/kakute-f7-amp-tekko32-f3-metal-4in1-esc-combo_p1129.html https://shop.holybro.com/kakute-f7-amp-tekko32-f3-metal-4in1...
other parts needed to complete something: motors, propellers, frame, battery, video tx (for something like 5.8 GHz band goggles), RC receiver, wiring, ublox m8n GPS receiver.
want a cheap frame? It'll be heavier than ordering a $45 carbon fiber frame from banggood or gearbest or aliexpress or such, but you can 3d print one at the cost of maybe half of a spool of $18 PLA filament:
https://www.thingiverse.com/thing:261145 https://www.thingiverse.com/thing:261145
https://www.thingiverse.com/thing:1206960 https://www.thingiverse.com/thing:1206960
- StavrosK 8y agoThis is all great advice. Ardupilot/Arducopter is heavy duty stuff, you can make a quadcopter/plane/whatever that will fly completely autonomously by giving it waypoints on a Google Maps interface. Highly recommended, I've built a plane like this and very much enjoyed the process. Total flight time was around thirty seconds because I managed to crash it twice, but live and learn.
- djpilot 8y agoWhat is the approximate price range to get everything needed?
- walrus01 8y agoabsolutely everything, there's some common ground station stuff (your handheld transmitter, and goggles or 7" LCD monitor + video receiver), that's an unavoidable upfront cost separate from the aircraft itself. Figure at minimum $300 to $400 for that. For a small quadcopter, $400-500 total parts cost, anything below that will involve a lot of quality compromises. Take a look at some of the RTF / ready to fly specifications sold by getfpv.com or helipal.com for examples.