4 ms·

> almost entirely from curved pieces (a near impossibility with traditional scoring and breaking) I was a little surprised when I read this because it means th

by dfc 8y ago

> almost entirely from curved pieces (a near impossibility with traditional scoring and breaking) I was a little surprised when I read this because it means the people at my local makerspace are magicians. There are tons of examples of curved stained glass as well as a lot of howtos on how to do it. The came glasswork page on wikipedia is full of stained glass with curves: https://en.wikipedia.org/wiki/Came_glasswork https://en.wikipedia.org/wiki/Came_glasswork What am I missing?

Gibbon1 8y ago
What you're missing is glass grinders (router) and band saws. Grinders use diamond abrasive bits and flood cooling. Glass bandsaws same deal. With those you can shape flat pieces any shape you want.
- michaelbuckbee 8y ago
  I had never heard of glass bandsaws before, but this looks amazing: https://www.youtube.com/watch?v=nyqfO7GdyJ0 https://www.youtube.com/watch?v=nyqfO7GdyJ0
- dfc 8y ago
  But you can also cut curved glass with traditional glass scoring? And this has been so for a long time.
  - Gibbon1 8y ago
    I tried that a couple of times, can be done. Takes skill I don't really have.
joshmillard 8y ago
I'll agree that "a near impossibility" feels like a real big overstatement; curves are very doable and common in hand-cut glass. That's true even in my first piece, under discussion, which is chock full of curves. I talk a bit in the process diary about getting comfortable with doing curved breaks after being over-cautious with my first few bits of glass. That said, I can see how a CNC approach could help with the speed of the process; shallow/simple curves are easy enough to do reliably, but deeper, more complex, and significantly concave curves require additional effort and planning, potentially a lot of manual work with grozing pilers to break out a concavity, and additional grinding to finish out the shape. So being able to turn a machine process to some of those cuts would save a lot of manual effort and potentially get you right up to the final polish-grind stage in one go, which certainly sounds attractive for some kinds of design.

by dfc 8y ago

Gibbon1 8y ago

What you're missing is glass grinders (router) and band saws. Grinders use diamond abrasive bits and flood cooling. Glass bandsaws same deal. With those you can shape flat pieces any shape you want.

michaelbuckbee 8y ago
I had never heard of glass bandsaws before, but this looks amazing: https://www.youtube.com/watch?v=nyqfO7GdyJ0 https://www.youtube.com/watch?v=nyqfO7GdyJ0
dfc 8y ago
But you can also cut curved glass with traditional glass scoring? And this has been so for a long time.
- Gibbon1 8y ago
  I tried that a couple of times, can be done. Takes skill I don't really have.

joshmillard 8y ago

I'll agree that "a near impossibility" feels like a real big overstatement; curves are very doable and common in hand-cut glass. That's true even in my first piece, under discussion, which is chock full of curves. I talk a bit in the process diary about getting comfortable with doing curved breaks after being over-cautious with my first few bits of glass. That said, I can see how a CNC approach could help with the speed of the process; shallow/simple curves are easy enough to do reliably, but deeper, more complex, and significantly concave curves require additional effort and planning, potentially a lot of manual work with grozing pilers to break out a concavity, and additional grinding to finish out the shape. So being able to turn a machine process to some of those cuts would save a lot of manual effort and potentially get you right up to the final polish-grind stage in one go, which certainly sounds attractive for some kinds of design.