7 ms·
"if you’re doing superconducting qubits, which is maybe the most popular approach today, then at a bare minimum, you need to cool everything down to 10 mKB," A
by jerf 8y ago
"if you’re doing superconducting qubits, which is maybe the most popular approach today, then at a bare minimum, you need to cool everything down to 10 mKB,"
Anyone know what that temperature is supposed to be? Googling for "mkb" doesn't come up with anything I can scrounge up. mK for milli-Kelvin doesn't make much sense, as you don't need to get that low for superconductivity in general, and that's a pretty hard temperature to reach.
- jpfed 8y agoWell, there's a pretty cool DJ with the username "mkb" across a few different sites. Aaronson is correctly noting that any superconducting quantum computer needs to be at least ten times as cool as that guy in order to work.
- knopyPusher 8y agoIt's not just superconductivity that you need. You also need to reduce thermal noise to maintain coherence between qubits. mill-Kelvin is the typical temperature range D-Wave computers go to [1], for instance. In fact, when you see large mainframe-like pictures of quantum computers, the big box mostly contains cooling equipment. The actual circuitry is pretty small. [1] https://www.dwavesys.com/tutorials/background-reading-series/introduction-d-wave-quantum-hardware https://www.dwavesys.com/tutorials/background-reading-series...
- pfortuny 8y agoI guess it may be mass times the Boltzmann constant (https://en.wikipedia.org/wiki/Boltzmann_constant https://en.wikipedia.org/wiki/Boltzmann_constant) BUT I HAVE NO IDEA. And maybe he is handwaving some arithmetic manipulations. (?)
- Sniffnoy 8y agoYup, he meant 10 milliKelvin: https://www.scottaaronson.com/blog/?p=4121#comment-1804067 https://www.scottaaronson.com/blog/?p=4121#comment-1804067
- jerf 8y agoThank you, and thank you to the other repliers who answered. I have learned something today.
- liuhenry 8y ago10 milliKelvin is the temperature range that allows the usage of commercial RF equipment in the ~5GHz range to control the qubits. The relationship between the two is essentially Energy = k_B * temp = h * freq, where k_B is the Boltzmann constant and h is Planck's constant. If the temperature was higher than 10 milliKelvin, then thermal fluctuations could have comparable energy to your control signals and thus cause unintended electronic state transitions.