3 ms·
> The 'top' of every USB-A plug I've ever seen is smooth, while the 'bottom' has a seam down the middle. And you can tell the receptacle's orientation from a gl
by chrisseaton 8y ago
> The 'top' of every USB-A plug I've ever seen is smooth, while the 'bottom' has a seam down the middle. And you can tell the receptacle's orientation from a glance just as easily, but you don't have to because the 'top' side of the plug should face the 'top' of the device it is plugging into in almost every consumer device I've used.
I can't tell if you're joking. You've just written three hundred characters about how to plug in a cable. Why is it that complicated? Why didn't they design it to go in in any orientation?
- leggomylibro 8y agoOkay, how about this? "Plug in the cable face-up." It's just less accurate for edge cases like tower PCs with slots facing the side. And fair's fair, I hadn't thought about how annoying it is when you have to reach behind a machine to plug something into one of those. But then again, it's usually hard to plug things together when you can't see them. I dunno, it just really doesn't seem like an issue in practice.
- chrisseaton 8y ago> "Plug in the cable face-up." What's the face? Which way is up? Can't you see that these descriptions don't work?
- dingaling 8y ago> Why didn't they design it to go in in any orientation? 'They' ( Ajay Bhatt and his team at Intel ) considered that to be a good idea, but decided against it for cost reasons at a time they were trying to get USB adopted. A reversible plug would have doubled the wiring complexity in the connector and that was considered financially unviable. USB at the time had to be as cheap as possible to make it 'universal". Incidentally in the UK we have a non-IT equivalent to the problem, the Standard Lamp Paradox. Since there is a switch on domestic electrical outlets, and another switch on a lamp, it often takes three tries in the dark to turn on a lamp since the initial switch state is unknown.
- neuralRiot 8y agoThey didn't even needed to make it reversible just asymmetrical, the HDMI or the displayport connector should've be the USB.