When I refer to % flicker, I am talking about the modulation % as defined by IEEE 1789-2015 and some documentation from the Illuminating Engineering Society [0]

When I refer to % flicker, I am talking about the modulation % as defined by IEEE 1789-2015 and some documentation from the Illuminating Engineering Society [0][1]. More correctly, invisible flashing is known as the stroboscopic effect or phantom array effect. Two factors are often used to describe flicker for lighting: - Modulation %, a.k.a. % Flicker [The height or modulation of the waveform, formula is 100% * (A - B) / (A + B)] - Frequency [self-explanatory] Flicker Index is also used (refer to [1] page 7 for more info) but rarely. Duty cycle is not considered relevant, as you mentioned. Some tools designed to measure lighting, such as my UPRtek CV600 [2], spit out % flicker, frequency, and flicker index, in addition to a bunch of spectrophotometry metrics. It's also pretty easy to calculate the modulation % with an oscilloscope and photodiode, it's just Vp-p / Vmax. IEEE 1789 [0][1] roughly says that the higher the flicker frequency, the more acceptable it is to have a high modulation %. If you look at the graphic on [1] page 18, you can see this relationship. The white area is considered unsafe, the yellow area is "low-risk", and the green area is "safe." I don't 100% agree with this personally, as most incandescent lighting, with around 6-11% flicker at 100-120 Hz, would fall into the unsafe or low-risk category. But the Soraa product is definitely in the unsafe category. For reference, I plotted my product (Bedtime Bulb) against an incandescent A19, Lighting Science's Goodnight A19, and Soraa's Healthy A19 on an IEEE 1789 graphic [3] with a Python tool I'm developing, Beautiful Flicker [4]. You can see that this incandescent, measured around 10%, is on the border between unsafe and low-risk by this standard. Hope this helps! [0] IEEE 1789: A new standard for evaluating flickering LEDs?: https://www.dial.de/en/blog/article/ieee-1789-a-new-standard-for-evaluating-flickering-leds/ https://www.dial.de/en/blog/article/ieee-1789-a-new-standard... [1] Flicker: Understanding the New Recommended Practice (PDF) https://www.energy.gov/sites/prod/files/2015/05/f22/miller%2Blehman_flicker_lightfair2015.pdf https://www.energy.gov/sites/prod/files/2015/05/f22/miller%2... [2] UPRtek CV600 https://www.uprtek.com/en/product/SPECTRAL-COLOR-METER/CV600-Spectral-Color-Meter.html https://www.uprtek.com/en/product/SPECTRAL-COLOR-METER/CV600... [3] IEEE 1789 Graphic Comparing 4 Light Sources https://github.com/yeutterg/beautiful-flicker/blob/master/out/Low%20Blue%20Flicker%20Comparison.png https://github.com/yeutterg/beautiful-flicker/blob/master/ou... [4] Beautiful Flicker https://github.com/yeutterg/beautiful-flicker https://github.com/yeutterg/beautiful-flicker