4 ms·
Do any of them support the arc or spline gcode? I noticed that most of the 3d printers do not, even though they are essentially 4-axis CNCs.
by phkahler 8y ago
Do any of them support the arc or spline gcode? I noticed that most of the 3d printers do not, even though they are essentially 4-axis CNCs.
- Ccecil 8y ago3d printers typically don't care about arcs or splines since they only use STL files which do not have "real" curves. Some firmwares support arcs (smoothieware, which is based on GRBL) but it still breaks the arcs down to segments.
- phkahler 8y ago>> 3d printers typically don't care about arcs or splines since they only use STL files which do not have "real" curves. I would have thought the printer would support arcs even if the slicer doesn't. There is work going on to support arcs in slic3r (automatic detection of arcs) but it will be irrelevant for printers that don't support it. It's would also be possible for a slicer to import step files and find such surfaces. One can also approximate other curves with fewer gcodes if they use arcs vs lines - splines even fewer.
- Ccecil 8y agoSome of the firmware versions do have G2/G3 in them but not all. http://smoothieware.org/supported-g-codes http://smoothieware.org/supported-g-codes I assume most of the modern ones do but some of the older 3d printing firmware use a very butchered version of the gcode "standard" which eliminate or rename many of the unused codes.
- dwild 8y agoI just flashed my Ender 3 using the latest Marlin version and I deactivated ARC support manually on it to save space. Considering how pretty much all 3D printers use a Marlin firmware, seems like ARC is supported pretty much everywhere.
- jcoffland 8y agoG3 and G4 arcs are supported but not splines. It would be easy to add spline support but there is very little demand for them. Since I released CAMotics in 2011 no one has asked for spline support.