3 ms·
Been recently putting together a homelab and it's done wonders to help make some of these more abstract things like routing tables and CIDR mentioned a lot more
by vvanders 8y ago
Been recently putting together a homelab and it's done wonders to help make some of these more abstract things like routing tables and CIDR mentioned a lot more concrete.
- voltagex_ 8y agoAre you able to share any details? I started putting together a more complex setup and ended up flattening things out because I couldn't get routing between e.g. 10.0.0.1 and 10.1.0.1 working.
- vvanders 8y agoYeah, totally depends on what you're using for a router/gateway/firewall. I've got a mix of Ubiquiti gear and pfSense. Most of it was a matter of just setting up a static route(like in the article) where when I'm on the 192.x.x.x(192.0.0.0/24) network and want to talk to 10.0.0.0/24 I'd put in the gateway(10.0.0.1) as the next hop. Without knowing more about your setup it's hard to say. r/homelab is also a pretty decent place with a lot of helpful people interested in networking and homelabs.
- voltagex_ 8y agoI've got an all-Ubiquiti setup (and once you start digging into the forums / need IPv6, boy is it unimpressive) It seems like going with the Ubiquiti USG instead of the EdgeRouter or a pfsense box was a big mistake. I'm heavily space/heat/power constrained though.
- vvanders 8y agoSame USG here. If you're on two different networks in the Unifi setup you'll also probably need a firewall rule between them. In my case the 10.0.0.0/24 was on pfSense so the Unifi router just passed it along and didn't do anything else.