4 ms·
I've had a lot of fun over Christmas assembling a Gigatron TTL - a computer built almost entirely out of 74-series chips. It's amazingly easy to follow exactly
by rwmj 8y ago
I've had a lot of fun over Christmas assembling a Gigatron TTL - a computer built almost entirely out of 74-series chips. It's amazingly easy to follow exactly how it works just by looking at the schematics. (More build photos coming on my blog in a few days: https://rwmj.wordpress.com/ https://rwmj.wordpress.com/)
- jacquesm 8y agoI looked over the few solder joints that are visible and I think your soldering technique needs some work. First make sure your iron is actually hot enough, a hotter iron works quicker and the result is less, not more heating of the joint. Then, try to work like this: first heat up the joint with just a tiny bit of solder on the tip of the iron, much less than you need for the joint, just enough to transfer heat, do that for 1 to 2 seconds, then feed in just enough solder from the spool to make the joint, withdraw the spool and then the iron and let it cool without moving at all. That way your joints will flow nicely instead of beading above the PCB and you won't have too much solder in the joints. Good luck!
- rwmj 8y agoYup I'm totally sure my soldering sucks. In fact I started out my career as a hardware engineer, and there's a few reasons why I'm a software engineer now :-) (Edit: To be fair the picture shows the first few joints where I was basically getting into the swing of things. Things improved after that.)