5 ms·
> something that is 5000 degrees reflected off of an object with albedo 0.12 is putting out 0.12 times the energy it originally did, while something that is 250
by taneq 8y ago
> something that is 5000 degrees reflected off of an object with albedo 0.12 is putting out 0.12 times the energy it originally did, while something that is 2500 degrees only puts out (1/2)^4 = .0625 times as much
I don't understand this bit. I don't think there's any power law involved in reflection, if something has an albedo of 0.12 then it just reflects 0.12 times the incident radiation, doesn't it?
I think I agree with your overall point, though, which is that the moon isn't a black body radiator (well it is but only at a couple of hundred degrees C at most) but is just reflecting the sun's light (and those photons are hot enough to start fires).
- sandworm101 8y agoAll photons can start fires. They arent hotter or colder individual photons, just photons at different energy levels/wavelengths/relative velocity. Heat happens once photons collide with stuff. Heat is a group effort. Get enough photons to hit something and it will warm. Photon colour, and the reflectivity of the struck object, alters the needed number but with infinite photons fire (300*?) is always possible. Fiber optics could probably collect and point enough moonlight to light a match. If we call fiber a sort of flexible lens, then lenses can start fires.
- gowld 8y agoIf your fiber network could heat the match hotter than the moon, why wouldn't the match heat the moon instead? How do you cram all the ends of those fibers (with total surface area equal to the moon) into a target smaller than the moon? Fiber optics aren't lasers.
- sandworm101 8y agoBecause reversing the system isnt straitforwards. Fiber tends to bend light back towards the middle of the fiber. Shining light back down the middle doesnt mean it will reappear at the same point, which is important for many types of lasers. Archers see this. Many archery sights use fiber to make nice illuminated dots, without batteries or leds. The light appearing out the end of the fiber is brighter than the skin, a rare practical use of "naked" optical fibers. https://www.nanoptics.com/service/replacement-bowsight-fiber/ https://www.nanoptics.com/service/replacement-bowsight-fiber... The above are junk fiber (little internal lensing) but you can see the effect.
- tbabb 8y agoSorry, this is wrong. Please don't "explain" your misunderstanding as if you know the answer; ask questions instead. If we imagine a full sphere of inward-pointing fibers, each one "looking" at the moon, then we see moon-surface in all directions from within this contraption. We are in a thermal bath of moon-temperature. We will not get hotter than the moon. And fibers are not needed to create this circumstance. The same situation ("moon visible in all directions") could be created with a few lenses and mirrors.
- sandworm101 8y agoNot the system i was talking about. None of the fibers would "look at the moon". Fiber isnt the same as lenses. Note too that i said match. Getting tiny bit of a matchhead hot enough to decompose isnt the same as burning an ant. A matchhead on the surface of the moon would probably ignite just fine (150*+o2).
- amluto 8y agoFiber is very much the same as lenses. (Well, the fiber you’re thinking of is. Fluorescent fiber is not, but that’s another story.)
- tbabb 8y agoAgain you are "explaining" when you should be asking. > None of the fibers would "look at the moon". Fiber isnt the same as lenses. I think you meant to ask "how is a fiber different from a lens?" instead of asserting "fiber isn't the same as lenses," which turns out to be completely wrong. To a physicist, a lens is a shaped piece of refractive medium-- that is exactly what a fiber is. There is no magic inside the fiber; it does not add any photons. You are looking through a shaped piece glass, through which you will see a (possibly very distorted) image of what's on the other side. In this case, it's the moon that is on the other side. The most you could do is surround your match/ant/whatever with fibers/lenses which are showing the moon on the other side of them. And from this fact it is unavoidable that you cannot make your surrounded subject hotter than the surface of the moon. If you are trying to say anything to the contrary, I'm sorry, but you are Flat Wrong. Any other configuration of fiber would give you less moonlight than completely surrounding the subject, so it's not going to improve the odds of starting a fire. > Note too that i said match. Getting tiny bit of a matchhead hot enough to decompose isnt the same as burning an ant. I think you meant to ask "does the material or shape change anything?" instead of asserting "it isn't the same," which again, in the context of this question, turns out to be completely wrong. The maxiumum temperature that can be imparted by a lens/mirror system doesn't depend on what it's focused on at all. In the long run, the ant/match/whatever will reach that maximum temperature and not get hotter. From a thermodynamics perspective, it is like putting an object in an oven of a particular temperature-- It doesn't matter if you put in a brick, or a cake, or match, or an ant; eventually they will all be 250 degrees if the oven is set to 250 degrees. In this case, the "oven" is the moon, and it's set to about 120C. A match combusts at about 600C. There will be no combusting of the match by putting it in the moon-oven. Sorry. End of story. And if I can give some advice: If what you're hearing doesn't make sense to you, it is always safer to ask a question than to blindly assert your gut-guess of how you think it is. Someone who thinks they're an expert but spouts nonsense looks like a fool. Someone who asks a question, though, looks curious, which is smart. These two people have the same degree of knowledge, but one comes off looking much worse than the other. That's why asking questions is better, especially when you don't know the knowledge of the people who are listening.