5 ms·

This might be why a lot of people (including me) hate whiteboard-coding interviews: we’ve gotten so spoiled by our tools that we can’t code without them! Isn't

• btilly 8y ago
  The difference is that training wheels are intended to be a temporary assistance until you've learned to operate without them, while development tools are meant to be a productivity boost. If you're working with a toolchain and aren't leaning on it, you're not working to your full potential. Whether being able to work without the chain is also important is an independent issue. (I happen to prefer vim+scripting languages over IDEs+compiled. But I recognize it as a personal preference, and not a question of moral superiority.)
  • stcredzero 8y ago
    The difference is that training wheels are intended to be a temporary assistance until you've learned to operate without them, while development tools are meant to be a productivity boost. Right, but pro cyclists don't say they couldn't do it without piece of equipment X. X is just a performance boost. Some coders say they couldn't practically do it at all without X. There would be a big difference in fitness between a commuter being unable to make a certain trip without a motor assist, and a rider who could do the same trip without the motor assist. I think most would look askance at a "pro" in the 1st category. If you're working with a toolchain and aren't leaning on it, you're not working to your full potential. Yes, but you need to be wary that you're using the toolchain for its intended purpose. The toolchain is supposed to be saving you typing and lookup time. It's not supposed to be substituting for your actual understanding of the code. The former is a good thing, and you should be good at using the tool for that. The latter is a bad thing, and you shouldn't be doing that. By working out with nothing but an editor sometimes, you can work out in a way that guards against that. No football player plays actual games running through tires, but the exercise is apparently helpful. But I recognize it as a personal preference, and not a question of moral superiority. It's not moral superiority. It's using tools as intended and not substituting for understanding.
    • jshowa3 8y ago
      Yes, but you need to be wary that you're using the toolchain for its intended purpose. The toolchain is supposed to be saving you typing and lookup time. It's not supposed to be substituting for your actual understanding of the code. The problem is, I don't think anyone completely understands the code when they write it. 90% of the time, you're writing code with a library written by someone else and you have an abstract understanding of what it does. That's the whole point of code is to abstract as much detail as possible. Its so you don't have to know what the machine code equivalent of X CPU add instruction is when coding a website for example. You just type + and the compiler/interpreter does everything for you.
      • stcredzero 8y ago
        The problem is, I don't think anyone completely understands the code when they write it. 90% of the time, you're writing code with a library written by someone else and you have an abstract understanding of what it does. The trick is this: Do you actually have that good abstract working understanding, or have you only convinced yourself? This is the difference between sloppily convincing yourself you understand a word salad, or being able to coherently teach a concept. It's even a further step to be able to understand the specification of something in enough detail to be able to implement it and to see potential pitfalls. (This is the difference between real science and cargo cult science: Predictive Power.) You just type + and the compiler/interpreter does everything for you. There's a world of difference between just typing "+" or "/" because you've seen it and just going on token frequency/pattern matching, and really understanding the concept. X = Y + Z Is often going to be quite different in control flow consequences from X = Y / Z If Z happens to be zero. If one is a careful programmer who has done substantive work, one should know there's a world of difference between a specification of a program that sounds good on the surface and a really good specification. After many years, one will have encountered many specifications which had to be re-thought one or more times to be practically implemented. No, you shouldn't have to always rewire your program in hardware from NAND gates you make yourself from silicon in the bucket of sand under your desk. (I've actually quit a job because the manager was going overboard with that attitude.) But you should be able to peek under the next level of abstraction, and have enough working knowledge to become wary and know when you should be peeking. Either you can do this, or you do not have that level of skill/knowledge. Simple as that. (Addendum: If you think to yourself that you can't do that, there's two common reactions to that. Either you tell yourself excuses and denigrate and don't bother, or you roll up your sleeves and learn it for yourself. You choose.)
• PeterisP 8y ago
  It's like a lumberjack so used to cutting down trees with a chainsaw that they'd have trouble to put down a decent tree with an axe. Powerful tools do certain subtasks for you, if you expect to use them all the time (and it's a reasonable expectation in your domain), then it makes all sense that you'd forget these subtasks. It's like manual memory allocation and proper deallocation - been there, done that, but after 10+ years of working with GC languages, I would definitely have some memory leak bugs if I suddenly had to do that again. It is a basic skill, but just as many other basic skills, it's one that you can ignore in most domains.
  • stcredzero 8y ago
    It's like a lumberjack so used to cutting down trees with a chainsaw that they'd have trouble to put down a decent tree with an axe. Bad analogy. It's more like a "lumberjack" who thinks all it takes is pressing the controls on a chainsaw. There's some more, very important things to know, and not knowing them can cost time and money or even get someone badly hurt. The chainsaw has to be maintained, with possibly severe consequences if it isn't. You need to know how to get the tree to fall where it's supposed to. You have to know how to cut so the weight of the tree doesn't clamp the chain. It's a bad analogy, because the important issue is whether someone is letting the tool substitute for understanding. I guess some rube might think their chainsaw is so powerful, they don't have to worry about how they cut down the tree. It's more like sailors who think they can just lean on GPS instead of having skills. Those are the guys who collide their ships and get people killed. It's more like pilots who weren't great student pilots, and they make critical mistakes and program the autopilot into the side of a mountain or do the wrong thing when the plane is stalling or always depend on the auto-landing system and don't really know how to do a manual landing and wreck the plane. (Those are all things that really happened.) Just because some big fraction of time being a "professional" is just being an end user doesn't mean there isn't something more beyond that which is very important. I guess it just has to do with what level of "professional" you aspire to be. It's like manual memory allocation and proper deallocation - been there, done that, but after 10+ years of working with GC languages, I would definitely have some memory leak bugs if I suddenly had to do that again. It is a basic skill, but just as many other basic skills, it's one that you can ignore in most domains. If you're doing something hard enough, you still have to think about stuff like that in a GC environment. I know, because I worked for a Smalltalk vendor. You can even have memory leaks in a GC environment. There's a lot of stuff you can ignore -- most of the time -- but can come and bite you real hard if you're not prepared for it.