3 ms·
> Battery life is only a few hours unfortunately because the circuit draws an enormous idle current of 23mA :o This is because the device is silly. Firstly, th
by kazinator 8y ago
> Battery life is only a few hours unfortunately because the circuit draws an enormous idle current of 23mA :o
This is because the device is silly. Firstly, there is an unnecessary voltage divider for generating a reference voltage. It is too stiff (resistors are too low-valued at 1K + 1K). This provides a reference voltage that is conveyed to high impedance destinations. 18V into 2Kohms means this consumes 9 milliamps!
Secondly, the device contains a bizarre circuit that tries to amplify the GND-GND path, using two op-amps in parallel.
The numbers check out: 9 mA for the voltage divider, plus around 8 mA x 2 IC-s (typical value from datasheet): 25 mA.
Here is how we can fix things.
1. We have two batteries! That is a true dual voltage supply! We can just take the center reference voltage between the two batteries. By doing that we lose the voltage divider entirely, and save 9mA of supply current.
2. We can lose the GND-GND amplifier, and just provide a proper end-to-end galvanic ground connection. We eliminate a pair of op-amps, and thus an entire IC chip.
We're now down to the current draw for a single NE5532.
3. Use a different op-amp. The NE5532 isn't great for driving low impedances like headphones. There are op-amps that are better suited for this, and draw less quiescent current.