5 ms·

Generally quite well. Pairing means your devices know to look for eachother, and the bitrate of music streaming over Bluetooth combined with the low range means

Generally quite well. Pairing means your devices know to look for eachother, and the bitrate of music streaming over Bluetooth combined with the low range means you'll need some unrealistic congestion before things really start to fail.

geggam 8y ago
unrealistic congestion before things really start to fail. aka public transit...
- pimeys 8y ago
  Or any busy street crossing with lots of cars.
  - TeMPOraL 8y ago
    On the one hand, that suggests either shitty Bluetooth devices you're using, or some pretty unusual density of Bluetooth users in the crowd. On the other hand, this is what mass adoption of wireless headphones will lead to, and it shows how ridiculously bad this is compared to the tried-and-true wire.
- Spivak 8y ago
  Everyone on a bus could be using BT and you're still not at enough people for connections to drop.
- tjohns 8y ago
  I've never run into Bluetooth congestion problems on public transit or busy streets. BT has a lot of problems, this really isn't one of them. There are some BT devices that have poor antenna designs and underpowered transcievers, where the proximity of other humans — or even your own body — can significantly attenuate the signal. But this isn't a problem with the spec itself, and there's plenty of devices that have shown it's possible to do it right.
  - gtyras2mrs 8y ago
    BT runs into congestion issues quite often in my experience. I’ve experienced connectivity issues in areas where there are a lot of wireless networks. Considering that WiFi and Bluetooth both run at near 2.4GHz - I’d assume that areas with a lot of wireless networks could (and have in my experience) interfere with BT. This wasn’t limited to 1 set of devices though. Tried it with my AirPods and a pair of NC Sennheiser headphones. Both cause issues when walking into busy (in terms of WiFi) areas.
jcelerier 8y ago
but that's the pairing step which was touted as problematic for users

geggam 8y ago

unrealistic congestion before things really start to fail. aka public transit...

pimeys 8y ago
Or any busy street crossing with lots of cars.
- TeMPOraL 8y ago
  On the one hand, that suggests either shitty Bluetooth devices you're using, or some pretty unusual density of Bluetooth users in the crowd. On the other hand, this is what mass adoption of wireless headphones will lead to, and it shows how ridiculously bad this is compared to the tried-and-true wire.
Spivak 8y ago
Everyone on a bus could be using BT and you're still not at enough people for connections to drop.
tjohns 8y ago
I've never run into Bluetooth congestion problems on public transit or busy streets. BT has a lot of problems, this really isn't one of them. There are some BT devices that have poor antenna designs and underpowered transcievers, where the proximity of other humans — or even your own body — can significantly attenuate the signal. But this isn't a problem with the spec itself, and there's plenty of devices that have shown it's possible to do it right.
- gtyras2mrs 8y ago
  BT runs into congestion issues quite often in my experience. I’ve experienced connectivity issues in areas where there are a lot of wireless networks. Considering that WiFi and Bluetooth both run at near 2.4GHz - I’d assume that areas with a lot of wireless networks could (and have in my experience) interfere with BT. This wasn’t limited to 1 set of devices though. Tried it with my AirPods and a pair of NC Sennheiser headphones. Both cause issues when walking into busy (in terms of WiFi) areas.

jcelerier 8y ago

but that's the pairing step which was touted as problematic for users