37 ms·
With fusion devices having trouble to confine the plasma for long times, I wonder if a massively-parallel fusion plant woud be feasible. Let's assume that plas
by nine_k 8y ago
With fusion devices having trouble to confine the plasma for long times, I wonder if a massively-parallel fusion plant woud be feasible.
Let's assume that plasma destabilisation does not damage the device, and is a mundane event.
Build 10 or even 20 fusion devices (economy of scale!) feeding the common heat buffer, e.g. a large reservoir of a molten salt or metal. Feed conventional turbines off the heat of the heat tank. The tank evens out the input power jumps.
Now we can restart the fusion in every fusion device every so often, provided that restarting it is made a mundane operation, too. It, of course, takes a lot of electricity to pump into the magnets. Conveniently, we have a mighty power plant right here. Dumping the magnetic/electric energy from the magnets requires a huge sink. Luckily, we already have such a sink co-located.
Building the plant takes a massive investment. Luckily, the architecture allows to build it piecemeal, feeding the next added unit with the power of the already built units.
BTW the waste heat could be directly reused in some kind of chemical processing, like smelting, or maybe even synthesis of carbohydrate fuels from ambient carbon dioxide and water.
- bicubic 8y agoThis doesn’t solve the fact that a single fusion pulse (all existing reactors are pulsed) currently consumes more energy than it produces.
- deleted 8y ago[deleted]
- nine_k 8y agoI remember hearing about break-even events for a few years. E.g. from 2014: https://www.nature.com/news/laser-fusion-experiment-extracts-net-energy-from-fuel-1.14710 https://www.nature.com/news/laser-fusion-experiment-extracts... A design that produces e.g. 2x the energy it consumes for the startup could be viable, even if pulsed (running minutes, not months).
- Chemiseblanc 8y agoIIRC They were able to get net energy from the fuel versus the energy of the x-rays used to ignite it. But not in terms of the energy of the lasers used to create the x-rays by vaporizing the fuel pellet.
- adrianN 8y agoConfining the plasma is easier in a larger reactor, so you might be better off building one big reactor instead of 20 small ones.
- nine_k 8y agoIf confinement is easier in a large machine, why are not very large machines being built? If this is economically infeasible, then again, building piecemeal may be better, in the same way as taking a credit and paying interest on it might be better if you can't secure the upfront sum anyway.
- gmueckl 8y agoPlease have a look how frigging huge ITER is. There is no other way to put it. This thing has its own campus. It is also delayed because it is the first of its kind and also underfunded with some mismanagement on top. But
- Obi_Juan_Kenobi 8y agoCost. Building huge magnets and a huge vacuum vessel is simply expensive. Fusion scales very well with two parameters: size and magnetic field strength. Size works great, but it's just too expensive. Even if you could justify the costs in theory, ITER is demonstration that the political will to invest that much capital with such a long payoff time just isn't there. Magnetic field strength is the new hope of the fusion industry: 'Cheap' high temperature superconductors have been commercialized and could make smaller fusion designs practical and economical.
- bsder 8y ago> If confinement is easier in a large machine, why are not very large machines being built? They are. ITER was designed to be as large as the engineering allows. But that is Expensive. The groups at MIT are trying to take advantage of the fact that newer superconductors allow you to get to ITER levels with smaller designs. However, those are Not Cheap either.
- 8y ago
- emilfihlman 8y ago>BTW the waste heat could be directly reused Yes, for district heating.
- semi-extrinsic 8y agoNot really. For power generation as in a coal or nuclear fusion or fission powerplant, you run a multi-stage steam turbine cycle to get down to as low a temperature as possible after the final LP turbine. Because that maximizes the Carnot efficiency of the (idealised) Rankine cycle, it also maximizes real world efficiency. In practice, coing down to ~40 C (~100F) is not uncommon. And then the waste heat is basically unusable, even for district heating. OTOH, if you need lots of heat (maybe you have a chemical plant or something nearby), you can design you powerplant for cogeneration of heat and power, yielding higher total system efficiency. But you don't do that "just" for district heating.
- twic 8y agoYou can (and at least one nuclear plant does!) run greenhouses off 40-celsius air. Maybe some tropical fish aquaculture. But no, nothing at infrastructure scale.
- antocv 8y agoWhat is it with physicists and molten salt? Every battery-tech, pro-nuclear, fusion related news have to have somebody chiming in "molten salt". Just an observation.
- ForHackernews 8y agoMolten salt has a high heat capacity and a higher boiling point than water, so you can get higher temperature without worrying about steam.
- deleted 8y ago[deleted]
- HoochTHX 8y agoNo pressure vessel required. Meaning no explosion possible. Intrinsic safety by design.
- Pica_soO 8y agoIts a superior concept, that regularly failed when realized in powerplants. Its part of the long list of experiMental reactors. With beautys like this concept: https://en.wikipedia.org/wiki/Sodium-cooled_fast_reactor#Disadvantages https://en.wikipedia.org/wiki/Sodium-cooled_fast_reactor#Dis... We had several attempts, and always the alternative medium causes more problems then trouble, corroding material, being flammable when escaping and other funny side-effects. https://en.wikipedia.org/wiki/Molten_salt_reactor#Disadvantages https://en.wikipedia.org/wiki/Molten_salt_reactor#Disadvanta... (TL,DR): It falls apart when under neutron bombardment. Of course, most of the proposers being theoretical physics enthusiasts, just ignore the long list of dangers, or even worse, love the addition of new problems to solve with experimental methods (the equivalent to problem solving by recursion on a labyrinth of depth n) and ignore the century long experience we have with hot water cycles. My suggestion to solve these sort of problems, is to build these reactor-prototypes on the roof of physics departments in university's.
- 08-15 8y agoMolten salts are hot! SCNR. Seriously though, molten salts are great heat transfer media, a bit like water, just at higher temperature and still low pressure. They are also completely immune to radiation damage, which is a big deal if you have 14MeV neutrons flying around and something has to stop them. Chemistry in molten salts is also interesting. Things can be extracted (say, into a molten metal phase) or precipitated, and some reactions just happen at 600 degrees while they need platinum and palladium catalysts at room temperature. What's not to love?
- pastullo 8y agoThe idea of having many small fusion reactors is quite interesting. I never thought about it and i would normally dismiss it since building a big one is cheaper than building many little ones. However, SpaceX and their 9-engine Falcon rocket teach us a different story. Sometimes building smaller yet complicated power plants is cheaper than building fewer ones but bigger. Would be great to know more about the economics behind a multi reactor power plant.
- gmueckl 8y agoThe real issue is surface to volune ratio of the contained plasma. This needs to be as small as possible for the containment to be effective (reduced energy losses through the surface area). So you want your reactors to be as big as possible.
- pfdietz 8y agoFrom an engineering point of view, though, you want the reactor to be as small as possible. That's because output is limited by the power/area that the first wall can withstand. So, the volumetric power density will be inversely proportional to the linear dimensions of the reactor.
- Retric 8y agoOk, several issues with this. First restarting these devices takes a lot of electricity, which drastically reduces your net efficiency. So, you still really want to solve this problem. Second, fusion devices scale very well so one device at 10x the scale is vastly better than 10 different devices at x size. Third, storing and pumping heat involves losses, where there is a huge range of great options for storing electricity. Fourth, it takes massive turbines to turn heat into energy, so you need to scale several things on both sides of your merged heat system in your modular design. Finally, X independent fusion devices don't have single points of failures shared between them. Your combined design would.
- nine_k 8y ago> there is a huge range of great options for storing electricity Producers of wind and solar power would love to hear about them! Re SPOF: since the fusion devices are much less reliable, as of now, than reservoirs of hot liquids, I suppose the reservoir is much less of a concern. I understand that fusion efficiency grows with size; this is why we are surrounded with colossal self-initiated fusion reactions, and have one nearby! But before we can scale, maybe we could still turn net-positive with smaller, less reliable devices. Remember how unreliable first cars were.
- Retric 8y ago> Maby we could still Early computers where huge and broke down all the time. They where built that way because it was the easiest option at the time. Nobody wants to build multi billion dollar devices if you could get away with spending 1/10th as much or even test several designs at the same time they would. PS: The grid absorbs solar and wind interment nature just fine without much in the way of storage. That might suggest something about large scale energy storage. Building something that can store GW’s worth of heat for minutes at a time is going to be huge and expensive.
- saagarjha 8y ago> The grid absorbs solar and wind interment nature just fine without much in the way of storage. I was under the impression that this was because we have a bunch of natural-gas power plants that are turned on when necessary to meet peak load.
- jimjansen1 8y agoWOAH GUYS THIS GUY ON THE INTERNET JUST SOLVED FUSION. lol
- maxxxxx 8y agoWith fusion bigger is better.
- whyisthis122 8y agoWhy is this upvoted? It shows a severe lack of physics knowledge. The whole goal of fusion is to get the energy amplification, Q, to be > 1, which requires the triple product n T t to be above some threshold. n is density, T is temperature, t is confinement duration. This is Lawson's criteria, you should look it up to educate yourself. Your proposal doesn't help n, T, or t, hence doesn't help Q. Also, there are economic and physical gains from concentrating your efforts into making your fusion reactor larger, rather than trying to make it 1/10 the size and have 10x of them. The economies of scale will happen once fusion ignition (Q>1) is achieved and we start mass producing dozens of fusion plants around the world. But at this point we're likely 10+ years away from achieving ignition.
- pfdietz 8y agoDT fusion reactors have inherent diseconomies of scale. That's because their power output is limited by what the first wall can withstand. By the square-cube law, the volumetric power density of a DT reactor must go down as its linear dimensions increase. This is not just quibbling, since bad power density is a huge problem with fusion. Look at ITER. The volumetric power density (gross fusion power/volume of reactor proper, not including the building or auxiliary equipment) is 0.05 MW/m^3. Compare that to a PWR primary reactor vessel, which have a power density around 20 MW/m^3. The smaller designs like ARC or Lockheed's concept have power density around 0.5 MW/m^3.