3 ms·
I'd be interested in a comparison of the cost and efficiency of this type of generator versus using an induction generator. Induction generators don't need mag
by amluto 8y ago
I'd be interested in a comparison of the cost and efficiency of this type of generator versus using an induction generator. Induction generators don't need magnets either.
I'm also wondering what type of generator they built. Is the superconductor in the rotor or the stator? Does it carry a DC current and, if so, is it operated in persistent mode? Or does it carry an AC current like an induction generator's rotor would?
- tgtweak 8y agoIt would seems like the superconductor works on stator and rotor like an induction generator. Edit: looks like it's just the rotor: Some quotes from the test: "The EcoSwing rotor is made up of two parts which are thermally decoupled by a vacuum chamber. The part responsible for the bearing and the mechanical connection of the generator rotor is operated at ambient temperatures; the electromagnetic part of the generator rotor is designed to operate at cryogenic temperatures. This places particular requirements on the test bench: The generator has to be cooled down to 30 K (that is about -240 °C) using a closed-cycle gas cooling. While this was the first time that such a cooling system has been operated at Fraunhofer IWES, it got confirmed that this type of cooling performed very reliably." "Sometimes less really is more: 40 per cent less weight and smaller dimensions than a comparable permanent magnet synchronous generator – these EcoSwing features are only possible thanks to superconductivity. With this solution just a fraction of the magnetically active material is required to outperform the power density of conventional generators. Since superconductors have practically no electrical resistance, the size of the conductor cross-section can be drastically reduced. This is a highly promising property for the development of future turbine generations." Image: https://www.iwes.fraunhofer.de/en/press---media/ecoswing-superconducting-generator-proves-itself-on-the-test-ben/_jcr_content/contentPar/sectioncomponent/sectionParsys/imagerow/imageComponent2/image.img.large.jpg/1527518952113_EcoSwing-KryogeneratorKuehlung68.jpg https://www.iwes.fraunhofer.de/en/press---media/ecoswing-sup... Article: https://www.iwes.fraunhofer.de/en/press---media/ecoswing-superconducting-generator-proves-itself-on-the-test-ben.html https://www.iwes.fraunhofer.de/en/press---media/ecoswing-sup...
- petre 8y agoPress releases and presentations say they used a direct-drive permanent-magnet generator with a full power converter and replaced the rotor. So it's most probably DC. https://ecoswing.eu/project https://ecoswing.eu/project
- rurban 8y agoIt's a PMM, so it's in the rotor, and a PMM is much more efficient and smaller than a simple induction generator. By factor 10 I would guess. Those types (usually built by Bombardier) generate AC, but convert intermediately to DC.
- amluto 8y agoI wonder if superconducting induction machines would be a useful research direction. They would be strange, since the flux through any particular loop of superconductor would be a constant.