4 ms·
60 GFlops on 96 cores is not that large. OTOH if you want to see how your massively parallel algorithm behaves on a 96-node cluster / network, such a box is ju
by nine_k 8y ago
60 GFlops on 96 cores is not that large.
OTOH if you want to see how your massively parallel algorithm behaves on a 96-node cluster / network, such a box is just $500, and is portable and can work offline.
- walterbell 8y agoLink or search term?
- monocasa 8y agoWhich component of his comment are asking about?
- walterbell 8y agoThis part: > how your massively parallel algorithm behaves on a 96-node cluster / network, such a box is just $500, and is portable and can work offline.
- patrioticaction 8y agoThe comparisons by GFlops was more or less a lark. Especially the ones comparing energy efficiency with a supercomputer from the 90s. This 96 core rig produces 1 GFlop per Watt, compare that to an i9-9900k (250GFlop), z390 chipset and 1 stick of DDR4 (95W + 7W + 2.5W = 104.5W) which does ~2.3 GFlop per Watt.* * this is back of napkin, real world results will vary
- DuskStar 8y agoI think the i9-9900k has a real-world sustained power draw of around 170W, actually: https://www.anandtech.com/show/13400/intel-9th-gen-core-i9-9900k-i7-9700k-i5-9600k-review/21 https://www.anandtech.com/show/13400/intel-9th-gen-core-i9-9... Add in all the ancillary hardware (motherboard, memory, hard drive, PSU losses) and that efficiency number is going to take a nosedive.
- magila 8y agoThat page is embarrassingly wrong about how power management works in Intel CPUs. By default Intel CPUs will not allow their rolling average power consumption over a period of ~1 minute to exceed the specified TDP (95 W in this case). Once the limit is reached the CPU reduces its frequency to bring power consumption down. Intel optimizes their CPUs to achieve a good balance between efficiency and performance when operating at the TDP. What you see in Anandtech's review is the result of motherboard firmware effectively disabling the power limit by setting it to a very high value. This is a common practice among enthusiast motherboards in order to boost scores in reviews. Unfortunately it also results in drastically lower power efficiency and lots of clueless people, including many tech writers, complaining about unrealistic TDP numbers.
- DuskStar 8y ago> By default Intel CPUs will not allow their rolling average power consumption over a period of ~1 minute to exceed the specified TDP (95 W in this case). From the page in question: "In this case, for the new 9th Generation Core processors, Intel has set the PL2 value to 210W. This is essentially the power required to hit the peak turbo on all cores, such as 4.7 GHz on the eight-core Core i9-9900K. So users can completely forget the 95W TDP when it comes to cooling. If a user wants those peak frequencies, it’s time to invest in something capable and serious." 95W is the required power to sustain the base clocks. Also, calling AnandTech clueless... Are there any better hardware review sites? I would consider them a tier 1 site, with HardOCP and not a whole lot else...
- 8y ago