5 ms·
Avoid Optimus like a plague if you are using Linux. There are quite decent Thinkpads with Ryzen/Vega APUs these days (like A485) which should work fine with ups
by shmerl 8y ago
Avoid Optimus like a plague if you are using Linux. There are quite decent Thinkpads with Ryzen/Vega APUs these days (like A485) which should work fine with upstream kernel and Mesa. But of course it's still Lenovo, so various blobs like UEFI remain.
- techntoke 8y agoWhile I agree generally on most distros, it works really well with Arch and is pretty easy to setup: - https://wiki.archlinux.org/index.php/NVIDIA_Optimus https://wiki.archlinux.org/index.php/NVIDIA_Optimus - https://wiki.archlinux.org/index.php/PRIME https://wiki.archlinux.org/index.php/PRIME
- jchw 8y agoArch Linux is nearly entirely unusable with this Thinkpad, which is a shame since that's my distro of choice usually. I fiddled with drivers for a good while but was getting severe issues hanging with proprietary Nvidia, and Nouveau simply crashed on boot. I'm currently on Fedora, which is one of the few distros that seemed to work without crashing all the time.
- blacksoil 8y agoMost painless config for me is to enable Nvidia only when I really need it. Say when I need to run a graphic-heavy application I spawn up a new X11 process running atop Nvidia drivers. For daily stuffs, I stick with Intel drivers
- Shikadi 8y agoI got Arch working fine on a Thinkpad with a GTX 900m series card. I just followed the guide for bumblebee. This was a good number of years ago though, but it still works with updates and all
- shmerl 8y agoNvidia blob doesn't really support PRIME properly. You can't use integrated GPU (Intel) to run your DE, while offloading specific heavy tasks to discrete one (Nvidia) which is kind of the main point. If you want to use PRIME, stick to AMD / Mesa.
- cpburns2009 8y agoAre you sure about that? I could swear when I was running Arch the DE was using my Intel GPU. I used either optirun or primusrun to use the Nvidia GPU. Granted, it was a pain to setup and I never could figure out why HDMI connected to a monitor would not work but was fine with a TV.
- shmerl 8y ago> I used either optirun or primusrun Neither is PRIME. PRIME would mean doing something like: DRI_PRIME=1 glxinfo Which will run it on one GPU, and display through another. Bumblebee is a workaround for this mess, not a proper upstream solution.
- arendtio 8y agoI have two system with integrated and discrete GPUs: 1. Intel Haswell + AMD RX460 (Desktop) 2. Intel Haswell + Nvidia GT750M (XPS 15 9530; Arch Linux) Ultimately, I switched to using the discrete GPU on both systems. Desktop: PRIME with Intel + AMD worked quite well (even with Steam applications running on the AMD GPU while the desktop was running on the Intel chip), but every now and then it caused the system to freeze, which was the reason I turned it off again :-/ Maybe I will try it again sometime in the future. But putting the additional energy costs aside, running the system exclusively on the AMD GPU is just fine (stable System + enough 3D performance for most games). Laptop: Since nouveau had still the frequency issues last time I checked, I was mostly using the Intel GPU. Someday I was fed up with not being able to try any fancy new machine learning/neuronal network/CUDA based examples that I decided to install the proprietary Nvidia driver. I don't know what it is, but for me, the experience with the open source drivers feels much better (maybe the broken v-sync with the proprietary driver?!?). Every single time I come in contact with the Nvidia driver I wish that damn company would either die or provide (or at least support) open source drivers (and I don't really care about the license that much, the open source drivers just have a quality the proprietary ones lack).
- sricks3 8y agoWhen did support for the APUs get added to the kernel? My wife got fed up with Windows a couple of years ago, and I tried to set up a dual boot on her HP laptop, but Ubuntu wouldn't display anything above 800x600. The best I could tell was that there just wasn't support (at the time) for her AMD APU, but I can't remember which model it was. All the drivers I found on the AMD website only officially supported 14.04, but even 14.04 wouldn't recognize the proper screen resolutions. I've been meaning to try again since 18.04 was released (or at least see if anything had been added to the kernel), but I haven't gotten around to it yet. Fingers crossed...
- opencl 8y agoDepends on which APU you have and which features you need. The latest Raven Ridge APUs had stability problems until 4.17, anything older should work on 18.04 which ships 4.15. HDMI/Displayport audio support for the older models landed in 4.15 but wasn't enabled by default until 4.17, so in 4.15-4.16 you have to pass the amdgpu.dc=1 kernel parameter for it work.
- shmerl 8y agoI recommend 4.19+ if you are planning to use one with Vega. Anything lower will have problems. Don't use drivers from AMD site, use upstream kernel and latest Mesa release.
- soulnothing 8y agoI have the A485, Windows is oddly a shit show with drivers. But linux is great with Arch and proton gaming. With the fat battery, it has great battery to boot I will say Ryzen APU is very janky. The new model should be coming soon. Though it took a year and half for the first mobile apus to become obtainable.
- shmerl 8y ago> The new model should be coming soon. Do you mean ones with Zen 2 / Navi? It might take a while, CPUs and GPUs aren't even out yet.