4 ms·
The complexity of "cars" has gone up exponentially over the years, so modifying them while still being reasonably sure that they're safe is getting harder. Toda
by adrianN 8y ago
The complexity of "cars" has gone up exponentially over the years, so modifying them while still being reasonably sure that they're safe is getting harder. Today cars are at least as much software as hardware and it's completely unclear which assumptions are hardcoded into them that you could invalidate by modifications.
- AnthonyMouse 8y ago> Today cars are at least as much software as hardware and it's completely unclear which assumptions are hardcoded into them that you could invalidate by modifications. This rings hollow as a novelty. If you replace the transmission with one that has higher gear ratios, it may raise the top speed past the maximum rating of other components. Any modification that makes the vehicle heavier may cause the brakes to be insufficient. Any modification that changes the weight distribution may have a number of difficult to predict consequences for steering and stopping. Tires that are better on a track may be worse in the rain. Tires with a different diameter may cause the speedometer to mislead the driver. Tuning the engine to reach higher RPMs may cause excessive hydraulic pressure and damages the brakes or steering. Anyone making any modification or repair may use non-OEM parts with arbitrarily different specifications. These are all complicated engineering decisions that depend on the assumptions made by the OEM. Maybe the brakes are sufficient with an extra 700 pounds, maybe not. Hardware isn't simpler than software, the assumptions are just less explicit. And encoding the complexity in software rather than hardware can make them less error-prone because software is more adaptable. It can read sensors and make realtime calculations. The assumptions encoded in hardware are static.
- adrianN 8y agoHardware is a lot simpler than software, because there are far fewer parts that can interact. Cars run millions of lines of code, they have far fewer mechanical components. There is a reason why software is eating the world, it's because you can have a lot more complexity for a lot less money.
- AnthonyMouse 8y ago> Hardware is a lot simpler than software, because there are far fewer parts that can interact. Do you remember the hardware that existed before it was replaced by software? Thick bundles of wires everywhere, mechanical switches operating relays and solenoids, intricate clockwork mechanical parts rotating in synchrony. There were early vehicles with mechanical anti-lock braking systems, cruise control, airbags, etc. Most of that complexity has been moved into software but the software wasn't what created it. And before it was software you had the full complexity that comes with the systems not only being designed by humans but also made out of atoms and molecules subject to all the intricacies of physics and chemistry, with no checksums or error correction to detect or correct a failure when something is operating out of spec.