3 ms·
I agree with your point, but I run a cluster of 6 ODroid systems (running an Emby server (which only runs on one of the nodes)) , and even then it peaks at arou
by tombert 8y ago
I agree with your point, but I run a cluster of 6 ODroid systems (running an Emby server (which only runs on one of the nodes)) , and even then it peaks at around 50 watts last time I measured (the hard drive array is separate and peaks at around 30).
I haven't done a ton of side-by-side comparisons, but it does feel like ARM runs more efficiently per watt.
- thfuran 8y agoIt is definitely the case that pushing raw performance erodes perf / watt on a given process and architecture. You could slightly underclock and moderately undervolt many CPUs or GPUs to see a fairly significant gain in perf / watt.
- nine_k 8y agoI suppose something like an i7 or Ryzen would be mostly idle running a similar load, and would consume a comparable amount of power, plus a lot of power to keep its hi-perf features, like huge caches and other, idling cores, up and ready to take load any nanosecond it arrives. Phone SoCs specifically address that by having 2+ CPUs of varied power, and having the high-power CPUs completely shut down and powered off when idle. Same applies to GPU cores that eat significant power when idle, and a lot of power when fully loaded. A PC with a 600W PSU likely features a large GPU that can consume e.g. 300W under full load, doing 60fps photorealistic rendering, or training a neural network. Phones just don't have this kind of hardware (they have much smaller ans less complex GPUs), and, again, manage to keep them powered down when not in use. Again, a PC drawing 50W or less while doing light office work is a pretty normal thing.