3 ms·
This just made me think of an interesting idea: Imagine a small loop-back-like device which is plugged into all open network ports - if any of them are removed
by samstave 8y ago
This just made me think of an interesting idea:
Imagine a small loop-back-like device which is plugged into all open network ports - if any of them are removed from a network port, an alert is generated stating "device from port 48 on switch 1 in closet 0 was removed"
- walrus01 8y agoIn general it's best practice to leave unused ports on managed switches in an admin down/shut state until something you know is connected. Or live, but in a quarantine VLAN. Your idea, however, is not totally uncommon to have a raspbery pi sized device at an offsite location, specifically not plugged into any sort of UPS, which is monitored by various alerting systems. In addition to the alerts that one should get during a grid power failure event from managed UPS and automated generator transfer switch systems, the disappearance of your "UPS canary" can indicate that something is going on at an unattended site.
- abraham_lincoln 8y agoMy college used to do similar. If you did not register your MAC address, you would be DHCP assigned into a walled-garden IP block. We found we could run an IP scanner on the authorized subnet (from a computer with a whitelisted MAC), and find the unused IPs, and just set those statically for 'visitors'. No need to register any more MAC addresses.
- dev_dull 8y agoI doubt they were very concerned with you or your friends. 80/20 solutions.
- abraham_lincoln 8y agoOnly had problems when a classmate was running routed. Oh, and all authorized IPs were in a public address space.
- lostlogin 8y agoOut of curiosity, you couldn’t just guess them based on knowing a couple? Or do people assigning them in some fashion that isn’t consecutive within the block?
- abraham_lincoln 8y agoyeah, definitely not consecutive.
- jlgaddis 8y agoYou simply weren't that much of a concern. DHCP snooping takes care of that problem quite well.
- hedwall 8y agoMost mid- to high end switches already support that kind of functionality.
- walrus01 8y agoyes, any decent managed switch from the last 15-16 years can send outbound snmp traps for interface up/down events.
- tomatocracy 8y agoAnd 802.1X is a thing as well, although it's not very widely used.
- michaelt 8y agoPeople don't fully power off their computers or take their laptops home where you work, huh?