+1 When I did mine recently, I dropped the entire K-frame, box and engine on to the floor in around 45-60minutes, had the head off in another 10 minutes, surfa

+1 When I did mine recently, I dropped the entire K-frame, box and engine on to the floor in around 45-60minutes, had the head off in another 10 minutes, surfaced both the flywheel and head's mating surfaces within the next 30 minutes (hey-ho flappy disk on the grinder! It's just an EG Civic with a d15b) and had the whole car assembled in an hour. The fact that I have access to a two post hoist cut my time down. Now compared with the fact that I have destroyed two phones attempting to separate the adhesive rubbish that holds everything together inside them, I actually think changing the clutch on an EG is probably easier for the "average" user than changing a modern phone battery. A decent set of ratcheting spanners, a torque wrench and a Haynes manual is all you need, and you're not going to accidentally break anything. It should also be noted that almost all cars "back in the day" (i.e. the 30's, 40's, etc) noted in their own user manuals how to check ring gaps etc with the expectations that owners would rebuild their own cars. How far we've come.