6 ms·
The Subway Doesn't Have to Be Hot and Gross
- digikata 8y ago"the majority [of heat comes] from the train hitting the brakes as it pulls into the station, an intense friction that gives off an exorbitant amount of warm air." I wonder if regenerative brakes can be installed (or are already installed...)
- amarshall 8y agoAll of the newer “NTT” cars have regenerative braking[1]. NTT cars make up, as far as I can tell, the majority of current revenue-service rolling stock[2] (but there’s still a lot of older cars in-service). [1] http://web.mta.info/nyct/facts/ffenvironment.htm http://web.mta.info/nyct/facts/ffenvironment.htm [2] http://www.thejoekorner.com/carassignments/index.html http://www.thejoekorner.com/carassignments/index.html
- adrianmonk 8y agoAnd/or platform doors: https://en.wikipedia.org/wiki/Platform_screen_doors https://en.wikipedia.org/wiki/Platform_screen_doors Seems like they'd keep heat from the train from making its way onto the platform. And if platforms are air-conditioned, they'd keep that air from escaping into the tunnels. And of course they can also help with safety.
- bobthepanda 8y agoDoors only work if they can line up with every single train that services said platform. Unfortunately, not all trains share door positions, and most platforms will see a mixed fleet of trains. The new trains have consistent door positioning, but the old ones are still in good working order and aren't due for retirement until late 2020s-early 2030s.
- manquer 8y agoIt is still doable, you can start by splitting the running stock by similarly aligned doors run them on few line and start with the few lines which are now already aligned. Realistically by the time you are even close to half the 470 stations it will be late 2020's anyway. Then you can aim for full coverage as the stock is deprecated. It is more likely the $1-2 million per station cost is not high priority as say CBTC which will improve revenue as it increases capacity.
- bobthepanda 8y agoThe problem is that none of the lines except two of them are separated enough. Separating them to the degree required for this to work is not possible, because the crazy interlining is the only way to provide many trips in a patchwork system that was originally three competing subways; many transfers would not be available, and the remaining ones would not be able to handle the resulting transfer volume. It would also not be desirable, because right now reroutes are commonly used to maintain service in case of problems or maintenance; doors restricting fleets to lines would reduce operational flexibilty. The problem is also too large to segregate. We are talking about a third of the current fleet that is not compatible with new train door placements. Even after the oldest of these are retired with projected future train orders, it will be about a tenth of the fleet, larger than the entire Boston T rapid transit fleet.
- adrianmonk 8y agoMaybe this could be solved by having platform doors that open in all the required positions? You could either add extra platform doors or make platform doors that are wider than the train doors and open part way to match the train. Unfortunately, if cars have different lengths, it increases permutations a lot. But you could handle even that by building a wall made entirely of doors (staggered on two door tracks), so the gap between any two doors can open up to any desired width.
- ascorbic 8y agoOne neat, low techregenerative braking system used in some places is having the stations built slightly higher than the rest of the network. As the train comes into the station, the slope helps it slow down, and then when it leaves the station, the slope helps it accelerate. Never underestimate the energy stored by moving a fully laden train a few centimetres up.
- ProfessorLayton 8y agoCurious to hear from someone who may know more about HVAC than me: Why don’t subway stations simply install giant industrial mini-spit-style air conditioners in these stations? It doesn’t seem particularly hard to rout a few dozen tubes of coolant down to a station while keeping the compressor and expelling heat outside.
- Alex3917 8y ago> It doesn’t seem particularly hard to rout a few dozen tubes of coolant down to a station while keeping the compressor and expelling heat outside. It's hard when you're spending $90.4M to install 3 elevators. That said, while mostly it's just an annoyance, the heat really is a hazard at a handful of stations; people are regularly blacking out at union square while waiting for the L.
- awiesenhofer 8y agoAny ideas why its so expensive? For 90m you could get a whole new tram line...
- tomarr 8y agoThe ducts get very large, so trying to fit them in existing infrastructure is a big challenge. Also consider that much of original 'spare' space has been repurposed for additional systems (CCTV, PA, additional power etc). It's different for new infrastructure where this can be allocated more readily at a smaller marginal cost.
- amarshall 8y agoAir conditioning in a large, unenclosed space is quite costly and inefficient. Stations typically have passive ventilation (in most NYC stations along most of the length of the platform, plus entrances). And then there’s the massive tunnel that lies between stations. The London Underground (which is referenced in the article) did a lot of things, but they didn’t try to air condition the stations. They did in-station air circulation, active ventilation from surface air, heat exchange cooling from existing cool water sources, and heat re-capture to heat homes. Then, of course, more specific to NYC, is that it’s more worthwhile presently to spend money on making the trains run more smoothly (whereby passengers will spend less time in the station), as the system has major issues there (and not enough money as-is).
- Renaud 8y ago20 years ago, the MTRC in Hong Kong started to install platform screen doors to seal off the platforms and reduce their air conditioning bill as most of the cool air was of course just going into the tunnels. That investment paid for itself within a few years. Evacuating the heat from the train is another issue that must be addressed but it’s far from being an unaddressable one and there are already many examples of other cities implementing workable solutions. Having doors installed along the platform has a number of advantages beside air conditioning: increased safety (no more suicides and accidents), more platform capacity since people can get right to the edge of the platform, potential increase in network capacity since trains can enter the station faster as they don’t have to slow down early to enter the platform at low speed to avoid passengers accidents. Older networks like London, Paris and New York have a much harder time implementing these measures as they are often very deep and their infrastructure are old and quite vast, but they each have projects to tackle these issues, although in the case of New York, the cost will probably slow down adoption (not least because of the crazy Union requirements).
- bobthepanda 8y agoThe problem with doors in New York in particular is that not all generations of rolling stock have doors in the same location. Unlike MTRC, where one line has its own rolling stock and there is no interoperation between different lines, many services, each with different door positions, can utilize the same platforms. And basically the only way to have a door configuration compatible with all rolling stock is to not install any doors at all. You could replace the rolling stock, but all of it is in good operating condition, and the last of the oldest cars with non-compatible doors would be retired in the 2030s. Air conditioning is also a huge challenge; traditionally, New York's subway has been cooled using the piston effect of trains, with frequent grates open to the surface to draw in air. With air conditioning those large, frequent openings are now a curse.
- IIAOPSW 8y agoWhat fraction of the fleet are incompatible? Just shove all the old trains on a single line for now and install the platform doors on that line in the 2030s.
- johnnyb9 8y agoWhy do you need AC when you can turn it into a spa? https://www.youtube.com/watch?v=agUF_53fmyw https://www.youtube.com/watch?v=agUF_53fmyw
- isatty2 8y agoAnyone who has taken the subway (MRT) in Singapore knows that stations definitely don't need to hot and gross. It maybe different because we don't need full HVAC but rather only air conditioning, but taking public transport has only ever been pleasant (except when it breaks down). Maybe some principles can be applied to other subway systems?
- mikemotherwell 8y agohttps://en.wikipedia.org/wiki/Mass_Rapid_Transit_(Singapore) https://en.wikipedia.org/wiki/Mass_Rapid_Transit_(Singapore) vs https://en.wikipedia.org/wiki/New_York_City_Subway https://en.wikipedia.org/wiki/New_York_City_Subway - not surprising we learned a lot in 80 years of operating subway systems.
- erikpukinskis 8y agoSo you have air conditioning but no heating or ventilation?
- jpalomaki 8y agoRegarding the heat generated from braking. I was surprised to find out that in our (very small) subway system the stations are higher than the rest of the track. This slows down the train as it is approaching the station and helps it regain speed when it leaves the station. A quite obvious idea, but must admit I might have not thought about it. In some cities they are building district cooling [1] (comparable to district heating). Might be quite a difficult solution in densely built areas of course. [1] https://en.wikipedia.org/wiki/District_cooling https://en.wikipedia.org/wiki/District_cooling
- rzzzt 8y agoCan passengers feel a mild roller coaster effect, or is the incline too small for that?
- Gravityloss 8y agoI would assume the incline would be impossible without seeing the horizon, because the car also accelerates. I guess you mean the increased gravity feeling at the bottom of the track?
- rzzzt 8y agoRight. I traveled once on a long-distance bus line that acted like a zero-gravity plane for a split second, as it went over a bump in the road. Just wondering if the experience would be comparable :)
- mislankanova 8y agoThe Central Line in London has some of its stations designed in this way, and you can certainly feel the slope when the train enters or leaves the station. After riding the Central Line frequently for one year I got used to that feeling and start to think that there is something missing when I ride other lines...
- sdx23 8y agoSo there is no (electric) brake energy recorvery? I find this surprising; especially for newer carts I'd presume that'd be default.
- Tade0 8y agoThe other day I calculated that the subway trains in Warsaw must give off as much heat during braking as a 70-100kW heater working continuously. And that's a conservative estimate given that I assumed the interval between trains going a given way to be 5 minutes - during the rush hour they're twice as frequent. Not to mention the collective body heat of a few hundred people waiting on the station which is (!) of the same order.
- gkanai 8y agoThe Tokyo subway is both air-conditioned on the platform (in places) as well as in the cars and has been for decades. China's subways are all air-conditioned.
- coldtea 8y agoNYC city subway is one of the low points of the city. On the other hand, it has this cinematic charm that I like as a tourist. But if I was going to work everyday and seeing this neglect, I'd rather had some renovations done.