5 ms·
PC-Retro Motherboard Kit: Build a faithful reproduction of the 1982 IBM PC 5150
- yjftsjthsd-h 8y agoDIY and hacked together out of third-party pieces? Yep, that's an authentic PC clone alright:)
- peter_d_sherman 8y agoI use the word "reproduction" because "clone" in the context of the Original IBM PC is/was an ill-defined word which means different things to different people: https://en.wikipedia.org/wiki/IBM_PC_compatible https://en.wikipedia.org/wiki/IBM_PC_compatible When some people think "clone", they think "compatibility" which leads to the following differences: Excerpt: "In May 1983, Future Computing defined four levels of compatibility:[11] Operationally Compatible. Can run "the top selling" IBM PC software, use PC expansion boards, and read and write PC disks. Has "complementary features" like portability or lower price that distinguish computer from the PC, which is sold in the same store. Examples: (Best) Columbia Data Products, Compaq; (Better) Corona; (Good) Eagle. Functionally Compatible. Runs own version of popular PC software. Cannot use PC expansion boards but can read and write PC disks. Cannot become Operationally Compatible. Example: TI Professional. Data Compatible. May not run top PC software. Can read and/or write PC disks. Can become Functionally Compatible. Examples: NCR Decision Mate, Olivetti M20, Wang PC, Zenith Z-100. Incompatible. Cannot read PC disks. Can become Data Compatible. Examples: Altos 586, DEC Rainbow 100, Grid Compass, Victor 9000." So what type of a "clone" are we talking about? I don't work for the company that makes the kit, and as far as I can tell prima facie, their kit is a faithful reproduction of the reference IBM PC hardware design. I may be wrong, however.
- ido 8y agoVery shortly after this article was published nobody was using the term in any way but the top one (nor were less than 100% compatible PCs even sold for much longer). My parents bought our first “ibm compatible” in 1987 and even back then the degree of compatibility was already a complete non-issue.
- deleted 8y ago[deleted]
- SmellyGeekBoy 8y agoI'm not sure if you were alive at the time but an IBM PC "clone" was basically anything with even a hint of compatibility with PC software, no matter how half-assed. I think the usage of the word "reproduction" is perfectly acceptable here. :)
- yjftsjthsd-h 8y agoI am quite aware that the clones quickly became, in effect, the real thing. In spite of the way people apparently are interpreting, I meant my comment as a compliment; this system, in no small part because it is a clone, is perfectly in line with the original PC ecosystem.
- userbinator 8y agoThe "anonymous BIOS" is just begging to be replaced with a copy of the actual IBM BIOS (whose source code is also available), but I guess they decided not to supply it for copyright reasons; on the other hand, they did clone the hardware... I bet it raises all sorts of difficult questions for the IP lawyers.
- deelowe 8y agoWhat's the issue with cloning the hardware?
- Nr7 8y agoPC clones were deemed legal back in the day. No reason this wouldn't be.
- walrus01 8y agoCompaq created a new BIOS from a clean sheet of paper design, not a reverse engineered or ROM dump. The code of the BIOS on the PC and PC/XT were copyrighted.
- jacquesm 8y agoI heard a tale - but can't find an online reference - for the first Compaq PC BIOS containing a bit that said 'Not (C) IBM' in order to pass some software checks searching for the strings '(C) IBM' being present at certain specific BIOS addresses.
- Nr7 8y agouserbinator's post clearly mentions cloning the hardware being problematic legality-wise and I was replying to that. Nobody's saying the cloned BIOS is problematic legal-wise.
- kevin_thibedeau 8y agoCompaq wrote a specification based on IBM's published code listing. Then they handed it over to a separate team to reimplement.
- jchw 8y agoThis is so very tempting, yet I know well I don't have the time or patience to set one of these up. I hope we'll at least see some of these pop up on YouTube, I'd love to watch someone assemble and use one of these.
- acd 8y agoRelated to IBM PC keyboards Unicomp modern versions of the IBM Model M keyboard built iwth the same tooling that made the originals. When living in a flat share I had access to a IBM Model M keyboard the one made for the PS/2 computer. This is one of the best keyboards I have ever used they are built like tanks. Unicomp keyboards https://www.pckeyboard.com/ https://www.pckeyboard.com/
- perl4ever 8y agoI tried a "buckling spring" keyboard (I think from Unicomp) that was supposed to be the equivalent of one of those IBMs and I was severely disappointed in the electronics. It could not handle multiple keys properly the way a real one would. Basically they had focused completely on the selling point of the springs and neglected to make a usable product. (I did have a real PS/2 Model M previously, so all I really wanted was a USB equivalent)
- throwaway2048 8y agoThe USB HID standard has a limit of 4 keys pressed at once, unless you do fuckery like virtual USB hubs with additional virtual keyboards (which will cause some things to misbehave) there is no way around this restriction without custom drivers (which are also a nightmare).
- ddingus 8y agoTIL By chance, do you know the limits on real PS/2?
- userbinator 8y agoEffectively none --- the keyboard only sends "key X is pressed" and "key X is released" messages. On the other hand, the key matrix design can impose its own limits.
- ddingus 8y ago
- Animats 8y agoWhy don't they stuff the board? It would probably cost less than packaging the parts and dealing with customer service issues.
- auvrw 8y agoperhaps the > Obviously, this is a project for an advanced electronic hobbyist and computer enthusiast. is somewhat tongue-in-cheek: this could be the thing to get a kid who's already soldered together a bunch of (less expensive) analog hobby kits .. or the adult who's into that sort of thing. it's pretty much the same thing as building model cars, airplanes, etc. although it doesn't teach you exactly how the thing works, the perceptual task of doing the soldering and checking out the traces gives some idea of how things piece together. as far as vintage electronics go, IBM PCs (probably?) aren't that difficult to find for those who're essentially interested in abstracting away from the hardware.
- raverbashing 8y agoAnd after you put it together, remember you need a power supply, a CGA? card and a keyboard to use it (and a DD or HD if you want to do anything besides looking at a screen)
- Narishma 8y agoI believe it was possible to use the original PC with cassette tapes instead of floppies, though you'd be limited to ROM BASIC in that case, and not PC-DOS.
- LeoPanthera 8y agoThere's a reason why DOS stands for Disk Operating System. :)
- wolfgke 8y ago> There's a reason why DOS stands for Disk Operating System. :) This is a retronym. Before purchased by Microsoft, DOS was developed by Seattle Computer Products under the name QDOS (Quick and Dirty Operating System). This was changed by Microsoft to MS-DOS with a changed meaning of "DOS".
- LeoPanthera 8y agoSure, that's correct. But the new name of "Disk OS" was completely relevant to this specific PC.
- magoon 8y agoI remember upgrading the RAM from a paltry 128KB (i think). See all of those empty sockets? Notably missing, and fair warning: - Floppy controller - Floppy drive! 5 1/4” - Hard drive controller (RLL) - CGA or Monochrome Display Adapter - Serial port adapter if you want to modem (25-pin 16450 UART) - PC-DOS Good luck. These are harder than you think, have no sound but a “beep”, and can’t even keep the time between reboots.
- chiph 8y agoAnd a keyboard with a 5-pin DIN plug (not PS/2 or USB). Bonus points if the function keys go down the side and not across the top.
- DanBC 8y agoDoes it include a cassette interface?
- amiga-workbench 8y agoIt does, but I don't believe it would be of much use, it was never really used on the original machines.
- dsr_ 8y agoEven if you can find a CGA or MDA, good luck finding a surviving monitor to display it. Honestly, you're probably better off finding an intact PC on ebay or Craigslist or such. And for doing anything practical, much better off with a Raspberry Pi variant.
- jacquesm 8y agoThat's a pretty kit and that was a very large amount of work, congratulations on seeing it through. I suspect there is a larger market for a more complete offering, so maybe tackle a graphics board next? I believe this video is about this project: https://www.youtube.com/watch?v=fCe0I3RJajY https://www.youtube.com/watch?v=fCe0I3RJajY If you want to go the 'soft' route of emulation then there is this: http://www.hampa.ch/pce/download.html http://www.hampa.ch/pce/download.html
- Narishma 8y agoPCem is more accurate, supports more hardware and is easier to use. http://pcem-emulator.co.uk/ http://pcem-emulator.co.uk/
- DoofusOfDeath 8y agoI'm amused by the timing of this article. I just watched the anime series "Steins;Gate", and a major plot element revolves around getting a working 5150.
- corerius 8y agoI'm waiting for the full 3270 PC or the XT/370 kit.