4 ms·
I expect that bolt selection was algorithmic not some individual's deliberate decision...and with a near certainty not some individual's or conspiring group's m
by brudgers 8y ago
I expect that bolt selection was algorithmic not some individual's deliberate decision...and with a near certainty not some individual's or conspiring group's malicious one. I mean, having to remove the strut brace to replace the spark plugs sets the context: a 2016 Mustang is not grandpa's '66 straight six. Sparkplugs have been chosen with 100k service life. The average 2016 Mustang will have one spark plug replacement during its service life. Expecting ASE mechanic type expertise that one time during normal use is not entirely unreasonable.
In the grand scheme of things, this seems like a pretty cheap DIY hot rodding oops. Fixable with a twenty dollar bill and a trip to Harbor Freight. It's not scored pistons, bent valves, and shrapnel in the oil pan. Good luck.
- lsiunsuex 8y agoBasically yes - get a bolt die cutter in 10-1.25 size, re-cut the threads on the bolt (their welded in, otherwise I'd just replace the bolt) and buy a new nut. No big deal - just a PITA. While the OEM spark plugs might be OK for a stock car, it's been tuned by a shop for more boost and soon I'll be running a methanol injection system - so, lifetime of the spark plugs drops to every 10-15k miles, so I've been told. </afterworkhobbies>
- brudgers 8y agoLooking at Youtube, there's no mention of different thread pitch for the strut tower brace mounting bolts when discussing the performance pack or upgrading with the Ford kits. The videos depict what looks like the same threads on both bolts. Maybe it's not the first time a die has been applied post factory?
- lsiunsuex 8y ago2 different nuts based on this video / product purchased https://www.steeda.com/steeda-mustang-strut-tower-brace-2015-555-5731.html https://www.steeda.com/steeda-mustang-strut-tower-brace-2015...
- brudgers 8y agoTo the best I could determine, the OEM part only uses the two large studs (each side). It does not require use of the strut mounting bolts. Unlike the Steeda part, partial disassembly of the strut system is not involved with the OEM system. For additional rigidity the Ford part has a supplemental brace to the firewall. Are you sure the engineering surprise is attributable to Ford?