8 ms·
Apollo Accelerators – Amiga Classic accelerator boards
- rasz 8y agoNo such thing as 68080, its fully compatible with 68040.
- qubex 8y agoA ”natural successor” to the 68040/68060 and suitable for implementation on FPGAs was developed by Apollo and is indeed known as the 68080. http://www.apollo-core.com/ http://www.apollo-core.com/
- ido 8y agothe website says 68060 (which was a real chip used in some amiga 4000T models & accelerator boards), I assume the title is a typo.
- bwldrbst 8y agoIt's not a typo. More info on the 68080 core can be found at http://www.apollo-core.com/ http://www.apollo-core.com/. I've got one in an Amiga 1000 and it's a lot of fun :)
- Jaruzel 8y agoMy Amiga 1000 is stock. I've only really though about adding A500 external HDD, and maybe a kickstart ROM mod. I'm not too sure about accelerating it, you still only have an OCS Amiga at the heart, so a lot of the demanding software still wouldn't run. So what is the benefit of a faster CPU in it?
- Annatar 8y agoSAGA and built-in hard disk support. Your A1000 will be able to do up to 1390 x 1024 x 32 via RTG. Any software which already targets RTG should be able to make use of that immediately. You’ll also have 128 MB of FAST RAM. I’m given to understand that eventually it might be possible to do 1920 x 1280 x 32. We’ll have to wait and see, but every core update makes it better and better.
- mondoshawan 8y agoThat poor Topaz bitmap font will be nearly unreadable at those resolutions. Sounds like we need a hidpi mode! ducks
- bwldrbst 8y agoThe 512K chip ram does limit the games it will run. I'm mainly using it for writing code and other OS friendly stuff. I'm keenly looking forward to the Gold 3 update which will give it 4MB chip ram and AGA output via HDMI.
- Annatar 8y agoNo, they literally came out with a new, superscalar 64-bit CPU core and named it 68080. It supports SIMD “AMMX” instructions as well. They invented additional instructions not found in the MC68060.
- Annatar 8y agoIt implements new, 64-bit instructions.
- synchronise 8y agoSo, this is essentially a continuation of the Natami project, but you still need original hardware?
- ahje 8y agoI can't wait to get my hands on the stand-alone version that's supposedly on the way. Cheap and available (and compatible) hardware with decent performance is a long-awaited thing for a lot of Amiga enthusiasts.
- bni 8y agoAny info on the stand alone version available?
- cmsj 8y agoNo. Beta hardware is being tested, but this whole project is driven in the spare time of the folk building/testing it, so it's slow going.
- bionoid 8y agoUnforunately no real information is available, the most recent update is the May progress report [0]. The 500 version is due for release before the standalone, and for the standalone they need to finish implementing the graphics/audio chipset in FPGA plus probably other design issues. Personally, I hope to see the 500 version available in 2019 and the standalone in 2020. [0] http://forum.apollo-accelerators.com/viewtopic.php?f=9&t=1908 http://forum.apollo-accelerators.com/viewtopic.php?f=9&t=190...
- jacobush 8y agoThere are VHDL or Verilog implementations of Amiga gfx/audio (see Minimig) but I wouldn't be surprised if the Apollo people want to do their own. After all, the (spiritual) successor, Natami, was to be compatible but greatly enhanced in the chipset front.
- azinman2 8y agoWhat will you do with it? I don’t fully understand why people are so excited by these things when the core OS hasn’t been updated in years?
- Udik 8y agoHmm.. but isn't a JITted emulator on a modern PC actually much faster nowadays? Just asking.
- Jaruzel 8y agoDefinitely. However retro hobbyists fall into two camps, those that are happy to emulate, and those that aren't. For those of us who prefer the real-deal this is a way of using original kit, but also making it faster + more ram + storage etc. The Amiga hardware scene is very much alive and kicking and there's new products coming out all the time.
- posting2fast 8y agoProbably, but you can't put a modern PC into an Amiga. I mean, if you already have one, being able to still upgrade it is just.... so cool <3
- mondoshawan 8y agoAlas, the Apollo boards only support the 500, 600, and 1200, which is impressive, but sadly thoses with 1k, 2k, 3k, 4k, or 4kTs are SOL. ;_;
- icedchai 8y agoI've read that you can hack it into a 1000. And there is an adapter for the 2000.
- armitron 8y agoThe best Amiga emulator (WinUAE) only runs on Windows and is still not quite there when it comes to emulating hardware expansions. Its ports to other OSes have been abandoned and the best candidate (fs-uae) is moving at snail pace whilst lacking a lot of the killer features from WinUAE. Original hardware with modern FPGA-based expansions is a lot better in terms of retaining the feel of the Amiga and not compromising on performance.
- 8y ago
- quickthrower2 8y agoThat room picture looks so homely and 90's!
- santoshalper 8y agoHomely means ugly. You mean cozy?
- sjm-lbm 8y agoJust a guess, but I'd bet they mean "homey".
- BjoernKW 8y agoThat's an American English / British English distinction. "Homely" only means "ugly" in American English and only when applied to a person. Otherwise, "homely" means something along the lines of "plain but cosy".
- deleted 8y ago[deleted]
- immigrantsheep 8y agothe work of Toni Bratincevic :)
- paulannesley 8y agoThanks, that led me to http://www.interstation3d.com/portfolio/16-bit_memories.jpg http://www.interstation3d.com/portfolio/16-bit_memories.jpg and more of his work at http://www.interstation3d.com/ http://www.interstation3d.com/
- quickthrower2 8y agoSilly question, but is he famous in 3D circles? Also I didn't even realize that scene was computer generated. That's amazing.
- 8y ago
- Annatar 8y agoI’ve got one in my Amiga 500 and it’s crazy: bumps the speed up to around 234 MHz, runs in 1390 x 1024 x 32 through RTG SAGA (“Super AGA”) driver and a HDMI output, MicroSDHC reader onboard (plus 44-pin IDE), 64-bit superscalar MC68080 (not a typo), 128 MB memory + realtime clock + 1 MB CHIP. The newest core adds FPU support and they’re considering adding MMU support too. I’m running AmigaOS 3.9... on an Amiga 500. Flashing of the FPGA circuitry with a new CPU core is done while the system is running, and they keep increasing the execution speed of the CPU with every update. The thing is nuts. In theory, once MMU support is added, it should be possible to port illumos back to MC68000, since SunOS 4 used to run on that CPU years back. Solaris zones, DTrace and ZFS on Amiga hardware... now that’s what I’d call a hacking project.
- ido 8y agoCan you still run everything (in original color/resolution modes) on the amiga monitor or does it only then work on the HDMI output?
- bwldrbst 8y agoFor now any screens using the Amiga's on board chips will use the original video outputs. Only RTG screens are displayed via HDMI. This will change in an upcoming release.
- Annatar 8y agoIf you have a scan doubler from Individual Computers and your monitor supports multiple inputs, the hardware banging resolutions go to that over VGA and Vampire goes over HDMI. If you don’t see it on HDMI you have to switch to VGA. The scan doubler is shitty though: the quality varies with the monitor and it overheats. Jens knows about this because the manual mentions adding a small fan and since he was obviously aware of it, it should have been designed in.
- icedchai 8y agoI'd love to get one of these... The Amiga was my favorite computer growing up in the late 80's, early 90's. BTW, Solaris 2.x and above (aka SunOS 5.x) never ran on the 68K. SunOS 4.x (retroactively renamed Solaris 1.x) did, but it was a completely different code base than Solaris 2.x and above. I used to have a Sun 3/60 back in the day! My Amiga 3000 was a better machine.
- aidos 8y agoI am not an electrical engineer so can someone explain how this thing can just piggyback on the existing chip like that. Is the existing cpu still doing things and this can read additional instructions the other one doesn’t see?
- jacobush 8y agoAll other Amiga "accelerators" from back in the day, tell, (by setting a pin low or high or something) the original CPU to stay quiet and off.
- armitron 8y agoIf you're talking about the A600 version that sits on top of the original 68k, it's disabled and never used for anything.
- snvzz 8y agoAIUI, at least Vampire V500v2, the one I have and for absurd reasons to do with physical distance with my Amigas haven't been able to test despite a year passed, 68k is removed and Vampire put in its place.
- paulmd 8y agoUsually the way these boards work is to simply pull all the CPU pins out to a separate socket. Apple called their equivalent the "Processor Direct Slot" and I'd assume the Amiga works in the same way. https://en.wikipedia.org/wiki/Processor_Direct_Slot https://en.wikipedia.org/wiki/Processor_Direct_Slot You can typically pull some lines down and the CPU will stop clocking, or the accelerator card can follow the CPU clock and bang data directly into it. It provides very low-level and direct control of the CPU.
- jacobush 8y agoSome Amiga CPUs were socketed, some were soldered. Some accelerator boards replaced the slotted CPU, most just deactivated the stock CPU.
- rpiguy 8y ago
- cmrdporcupine 8y agoThe interesting story for me here (and I've been following it for years) is not that people have built an accelerator for the Amiga. It's that the Apollo folks have built out an advanced modern 680x0-compatible core. Given that NXP/Freescale have stopped producing new Coldfire architecture MCU and MPUs and the 68k series itself is dead years ago, this is really great. It's good work, and benefits not just the Amiga community (and other classic 68k machines like the Atari ST) but anybody who wants to continue to experiment and work with the 68k architecture, or upgrade any kind of legacy system. I also understood that there was work happening on a from-scratch system that could run as an Amiga and potentially Atari ST compatible as well and would not require legacy hardware at all. I'd pay money for that. That said, I doubt they could get away with licensing it for $$ in quantities, I suspect that they'd run into legal problems at that point. But who knows?
- snvzz 8y agoAn emuTOS core exists, and it is included in the most recent build, Gold 2.9. This is demonstrated in these videos: https://www.youtube.com/watch?v=94EdhS_JTAg https://www.youtube.com/watch?v=94EdhS_JTAg https://www.youtube.com/watch?v=JErzSUv06Fo https://www.youtube.com/watch?v=JErzSUv06Fo
- cmrdporcupine 8y agoYeah I've seen the first video before, very cool, and a testament to the amazing work that the EmuTOS team has put into that project. But EmuTOS running isn't really "ST compatible", just EmuTOS compatible. It wouldn't for example be able to run most games and the like given the different video hardware, and would not have support for MIDI and other devices, etc. That said the second video does show a stock TOS running a game, so that's encouraging.
- snvzz 8y ago>That said the second video does show a stock TOS running a game, so that's encouraging. They probably threw in some replicated atari hardware into the core.
- melicerte 8y agoI believe the image on the amiga screen in the top banner shows the game Cannon Fodder[1] [1] https://en.wikipedia.org/wiki/Cannon_Fodder_(video_game) https://en.wikipedia.org/wiki/Cannon_Fodder_(video_game) and a video: https://www.youtube.com/watch?v=MyDGPlIkySA https://www.youtube.com/watch?v=MyDGPlIkySA