3 ms·
It's not just Apple, the thermal paste between the die and the heat spreader on newer Intel CPUs isn't getting good reviews either. Replacing the paste under th
by mrweasel 8y ago
It's not just Apple, the thermal paste between the die and the heat spreader on newer Intel CPUs isn't getting good reviews either. Replacing the paste under the heat spreader is a lot more tricky though, and requires special tools.
Why neither Apple nor Intel is opting for better thermal compound is amazing. Tests continue to CPU temperatures drop 10+ degrees (C) just by replacing the thermal compound. Even if they opted to get the very best thermal compound, I can't see it eat into the profit of either companies.
- wtallis 8y agoIt may not hurt their margins much to use more expensive thermal compound, but it definitely won't help them in any meaningful way. These products are optimized for real-world bursty workloads that basically never hit a serious thermal limit that better paste could help with. Even on the desktop chips, delidding and replacing the thermal compound provides no benefit until you're pretty far into overclocking territory.
- PKop 8y agoThey'd avoid bad press like this story though
- some_account 8y agoBut the price for this machine is crazy, and it doesn't support a use case where you actually use the i9 cpu for long periods of time... Why do you need it then? To open the browser a few milliseconds faster? It's not a professional machine if it's throttling heavily under load so you can't use its resources....it boggles my mind that it's even allowed to sell something like this. It's like selling a supercar which can't go at top speed for more than 20 seconds, then it throttles speed to 60 mph.
- FullyFunctional 8y agoNot disagreeing with you, but as it happens the Bugatti Veyron can't do the full top speed for very long (Michelin won't guarantee the tires to run above 250 mph for more than 15 minutes.).
- bradknowles 8y agoIt will run out of gas way before then.
- deadbunny 8y agoI recently built a new gaming PC, and it was so bad that I couldn't even run stock speeds without thermal throttling, let alone any overclocks. A swift delid and some new TIM and I had shaved 25c off the stock temps while no longer throttling. Woe betide any average user who isn't willing to void their warranty on a £500 part to get the it to run as it should, enjoy that RMA process. Half the issue is the shit TIM they use, the other half is the way they attach the IHS to the CPU. It's attached with a huge amount of sealant around the edges of the IHS and simply removing it will gain you a good 10c improvement because you're moving the IHS a few mm closer to the dye, combine it with good TIM and you're golden, replace it with some liquid metal TIM and you're off to the OC races. I could maybe forgive them if this was an isolated incident on one generation of chips but this has been the case for about 4 years now.
- paulmd 8y agoThe problem is actually that the silicone adhesive they use to attach the IHS is too thick. The act of shaving the adhesive down is what really produces thermal improvements. Delidding, shaving the adhesive, and replacing with fresh TIM produces nearly as good a result as using LM (without the risks of LM). And using LM without shaving the adhesive only produces a few degrees of improvement.