4 ms·
Who coughs up boku bucks for a Threadripper and an X399 board and then cheaps out on RAM?
by spamizbad 8y ago
Who coughs up boku bucks for a Threadripper and an X399 board and then cheaps out on RAM?
- dman 8y agoIt does feel weird paying more for RAM than you do for your CPU.
- elorant 8y agoWell, let's see. A TR4 mobo can host 8 dimms. Say you want to max out in RAM that's a minimum of $1100. Add at least 10% if you go for ECC modules. Eventually you end up paying for RAM more than what you pay for the CPU. That's why a lot of people are conservative with RAM when they build a new rig. Somehow it doesn't feel right to pay that much money for memory. So you buy the bare minimum and then wait for prices to normalize, which seems like taking forever in this freaking industry.
- dabockster 8y agoRGB > ECC Prove me wrong.
- deleted 8y ago[deleted]
- coherentpony 8y agoECC has a technical benefit whereas RGB has no benefit at all unless you prefer your DIMMs to look like Christmas tree ornaments on acid.
- berbec 8y agoIsn't every blinking light a gigaflop?
- dabockster 8y agoYes, plus an additional 100 FPS in games.
- dabockster 8y ago> you prefer your DIMMs to look like Christmas tree ornaments on acid This is a technical benefit.
- cesarb 8y agoThe trick is not to max out in RAM, but to use all the channels. So for a processor with 4 RAM channels, instead of a single 32GiB DIMM, you should use four identical 8GiB DIMMs.
- geezerjay 8y agoThat's solid advice if you're aiming for performance. If you're aiming for performance per buck at the expense of today's performance then it's far better to spend the bare minimum on a fewer but large-ish DIMMs and max out on RAM when your wallet recovers from the initial hit. Sometimes you don't notice the impact on performance, but you do notice doubling or quadrupling your RAM with a fraction of your initial budget.
- derefr 8y agos/boku/beaucoup/ Interesting eggcorn; where'd you learn it that way?
- spamizbad 8y agoNoted. I have no idea. I appreciate the corn removal.
- photon-torpedo 8y agoBelter creole?
- unwind 8y agoIt's listed by Wikipedia (not a native speaker and not aware of this word in English), see https://en.m.wiktionary.org/wiki/beaucoup https://en.m.wiktionary.org/wiki/beaucoup.
- bpchaps 8y agoYou might be surprised. A lot of us early adopters had a lot of issues with getting RAM to run at its advertised clock speed. Buying expensive RAM didn't really have benefits over cheap RAM. It took something like 4-6 months for a BIOS update to finally bring my TR's RAM to advertised clock speeds (and CPU RAID....). Though, it still had stability problems and overclocking still isn't worth the hassle. Getting the machine to a stable state was very reminiscent of 2008. Allegedly the second gen threadrippers are going to be much more stable. heh.
- et2o 8y agoI had lots of stability issues with mine on Linux kernel 4.15 which I eventually tracked down to the X399 motherboard M2 controller, not the CPU or ram as I had feared. TRIM on my M2 drive had somehow gotten enabled and was causing intermittent crashes everytime it ran as a cron job.
- Chilirose 8y agohaha they wont get a second chance with me