4 ms·
They dont. The power levels are less than 1% of military radars. Plus mass production. They are talking 10,000$ per unit, which isnt all that bad for cell equ
by sandworm101 8y ago
They dont. The power levels are less than 1% of military radars. Plus mass production. They are talking 10,000$ per unit, which isnt all that bad for cell equipment that can aim itself.
Military radars are for detecting quiet targets, not cellphones wanting internet. It is total apples and oranges in terms of energy levels.
- mNovak 8y agoWe're going to see some amount of beamsteering (and/or MIMO) on the handset side too. But only 3-10 elements--nowhere near the 1000s on an AESA.
- Gibbon1 8y agoLast time I looked you need a huge amount of elements to get good angular resolution. For Wifi two things. 1. All you care about is getting the ratio of multipath energy high enough that you can resolve independent signals. 2. Remember RF power is measured in db and your radio's power consumption is in linear watts. 6db better signal margin means you use half the amount of energy. Useful for devices that run off batteries, have issues with heat dissipation.[1] 3. Less energy transmitted means your effective cell size gets smaller. [1] Crusty old EE pointed out to me once the difference between a 85% efficient power supply and a 90% one is 65% less heat to get rid of. Same thing is true of RF power amps.
- fooker 8y ago10000$ isn't very good either, because 5G needs far more base stations (by about an order of magnitude) compared to 3G or LTE.
- sandworm101 8y agoYes and no. They can go a long way by adding more/narrower beams from existing locations.
- learc83 8y agoIn urban areas they are going to need to be on almost every corner because of line of site limitations.
- ars 8y ago$10,000 is nothing for that kind of thing - installation costs way more than that. Just renting the area from the owner is several thousand per month.
- vvanders 8y agoYeah, I've heard from ham types that it's really common to see near 7-figure buy-outs for prime tower land(50' x 50' + access) before even talking about costs of putting up 100'+ tower, power and hardware.
- fooker 8y agoSure. Now imagine if a wifi router cost a company 10000$ instead of 100$. These devices would need a density closer to wifi access points, compared to cellular towers.