5 ms·
What I find amazing is a film camera in a hard vacuum. I could be wrong but two things. Designing mechanical things that work in a hard vacuum is difficult. I'm
by Gibbon1 8y ago
What I find amazing is a film camera in a hard vacuum. I could be wrong but two things. Designing mechanical things that work in a hard vacuum is difficult. I'm assuming bad things would happen to film in a vacuum. So assuming they were sealed under argon or nitrogen.
- jacobush 8y agoNope.
- jacobush 8y ago"Lubricants had to be chosen with utmost care because of the risk that conventional lubricants could boil off in vacuum and condense all over the optical surfaces of the lens." http://www.mir.com.my/rb/photography/hardwares/moon/2.htm http://www.mir.com.my/rb/photography/hardwares/moon/2.htm
- Gibbon1 8y agoI do remember the hand held camera's weren't sealed. So film and components needed to be redesigned to work. For instance special anti static film. And mechanical parts made of glass to prevent cold welding. But with Apollo they could take the film back and develop it normally. The orbiters developed film in space and then scanned it. I tried looking and found nothing, but the orbiter camera's developed film using a semi-dry processed using damp ribbons that seem similar to a old typewriter ribbon.
- zaarn 8y agoMechnical things largely work the same. What you do have to pay attention to is that you can't have stuff like flywheels that rely on air to slow them down. Otherwise, a film camera would work the same in vacuum, even if it had some electric components. For the film itself, I don't think you need anything special, there is nothing on the material that would boil off under vacuum to my knowledge. The difficult parts are really heat because unlike in air, any heat you gain is difficult to get rid off again since there is no air to transport it away. So if you do have some electrics in your camera they can easily overheat if not designed for vacuum operation.
- eesmith 8y ago"Largely" is rather vague, and you left out things one does have to worry about. Quoting https://en.wikipedia.org/wiki/Vacuum_cementing https://en.wikipedia.org/wiki/Vacuum_cementing : > Vacuum cementing or vacuum welding is the natural process of solidifying small objects in a hard vacuum. ... > This effect was reported to be a problem with the first American and Soviet satellites, as small moving parts would seize together. ... > In 2009 the European Space Agency published a peer-reviewed paper detailing why cold welding is a significant issue that spacecraft designers need to carefully consider. Regarding specifically plastic, which might be used for the film, see https://en.wikipedia.org/wiki/Corrosion_in_space https://en.wikipedia.org/wiki/Corrosion_in_space : "Many plastics are considerably sensitive to atomic oxygen and ionizing radiation." That link also points out the "material fatigue caused by cyclical heating and cooling and associated thermal expansion mechanical stresses."
- Gibbon1 8y agoAs an example of cold welding. The Galileo spacecraft wasn't able to deploy its high-gain antenna because the pins that held it in place got stuck. There was graphite lubricant to prevent that but it was shaken out while it was being transported to the launch site. Also in the early 90's saw a price list for (3M's) two part silicone products. One product was $25,000 a gallon. Application was for space craft windows. Turns out regular silicon will out gas and fog windows under hard vacuum. All the above has lead me to have a lot of respect for the engineers that made this stuff work. Ditto because every time I've had a materials problem it's been a trail of tears.
- toomanybeersies 8y agoThey weren't sealed, but they were modified for space. You can't use liquid lubricants in space, so they had to use solid lubrication or none at all. Also, as film gets wound through the camera, it generates static electricity. Usually, this gets wicked away by the atmosphere. However, there is no atmosphere in space, so they had to have a special metal plate to dissipate the built up electrical charge. The film itself was normal photographic film, although a special emulsion made specifically for NASA.
- 4ad 8y agoFor the Moon landings, the film was not normal photographic film, it was a special thin base film mounted in special backs that allowed for 160/200 frames per back, instead of the 12 exposures you get with normal 120 film on a regular Hasselback back. Not sure what they used for the scouting missions. Weirdly enough they used color slide film for the Moon missions. I never understood why. Color slide film has much less dynamic range compared to color negative film (5-6 stops vs. 12-14 stops, depending on the specific films) and it is much more difficult to expose for correctly (in fact, most pictures taken on the Moon are severely under/overexposed). One explanations I heard was that there was no color reference on the moon, so they didn't know how to print from negative film, but that doesn't make any sense to me. The Moon is very gray, and they could have taken a color chart with them...
- Steve44 8y agoI had a Mamiya 645 which had 120 and also 220 backs. The 220 roll had double the number of exposures, this was enabled by a thinner film and less backing paper from what I recall. I recently sold it all and was told the 220 backs were worthless now, I presume the film is no longer / not widely available.
- 4ad 8y ago120 film is widely available. I don't know why 220 film was not that popular.