3 ms·
As I understand it, the Boring Company's strategy is to dig smaller tunnels. Since the volume of earth that must be moved scales with the square of the tunnel r
by thegranderson 8y ago
As I understand it, the Boring Company's strategy is to dig smaller tunnels. Since the volume of earth that must be moved scales with the square of the tunnel radius[1], a tunnel that is half as wide only requires a fourth of the dirt to be moved.
I believe this accounts for most of their estimated speed/cost advantage - dig thinner tunnels and move less dirt. They also seem to be coupling that with more continuous tunneling and less labor.
As far as I know, they're doing this with existing tunnel boring machines, just used differently.
Volume = pi * radius^2 * length
- Brakenshire 8y agoDon't you need wide tunnels to fit normal trains, let alone high speed trains, because they operate on a higher gauge? I know in London the new Crossrail tunnels have been deliberately made a lot wider than the existing Underground tunnels, because that allows normal trains to run through it. The Underground trains are narrow-gauge light-rail.
- JoeSmithson 8y agoNot just Crossrail, even the new tube lines, such as the Northern Line Extension to Battersea are dug much wider than the old tunnels they connect up to. Obviously they carry the same trains as the rest of the line. The narrowness of the old tunnels is a constant hurdle to improving the tube.
- KJKingJ 8y agoIndeed, wider tunnels make maintenance much easier, and also allow evacuation of the train via the regular side doors rather than through the cab door.
- Symbiote 8y ago> The Underground trains are narrow-gauge light-rail. No, they're standard gauge heavy rail; in some places the track is shared with ordinary passenger trains. The older tunnels just have very tight clearance. You may mean the structure gauge, which is the clearance for tunnels, platforms and so on. That is normal-rail for Crossrail.
- spiralx 8y agoYou need wide tunnels to reduce aerodynamic drag on the trains.
- Someone1234 8y agoAren't tunnels the size that they are to allow evacuation during emergencies and or to lower the pressure wave forming in front of a fast moving train (i.e. reduce drag)?