5 ms·
What issues have you seen that require a 2-hour reboot? Stability was one of my concerns with my last Pi project, so during development I basically never power
by HeyLaughingBoy 8y ago
What issues have you seen that require a 2-hour reboot?
Stability was one of my concerns with my last Pi project, so during development I basically never powered it off or rebooted (except to test power-up behavior) so I could see if I encountered any problems. No problems came up, but others' experiences are always good to learn from.
- nottorp 8y agoWas it a project in a climate controlled area, like your home? Mine were in a factory, and after a while the stuff that they were supposed to connect to over USB simply vanished. A reboot (of just the Pi, not the other device) fixed it. So we just scheduled a reboot in 2 hours when the Pi started up.
- HeyLaughingBoy 8y agoMore or less: at home, but in a basement room with temperature swings. For the application it was fine: it was going to be used in a temp controlled environment anyway. My current project I'm thinking of using BeagleBone because I trust their temperature range specs. Is it possible your Pi was suspending USB as part of power management? I've had that problem with some other devices.
- fhood 8y agoIn my stuff we never did a two hour reboot, but we did do a daily one. Sometimes you just run into memory leaks some of which aren't even your fault.
- nottorp 8y agoI don't know if they needed a two hour reboot, but the customer wanted to be sure. For sure they stopped seeing usb devices after less than 24 hours. It helped that they were just reading and transmitting some values every 10 minutes or so, the reboot didn't hinder that.