4 ms·
Dandelion uses a cheaper drilling method to reduce up-front costs. https://blog.x.company/introducing-dandelion-2706eded169a https://blog.x.company/introducing-
by sp332 8y ago
Dandelion uses a cheaper drilling method to reduce up-front costs. https://blog.x.company/introducing-dandelion-2706eded169a https://blog.x.company/introducing-dandelion-2706eded169a
- sdhgaiojfsa 8y agoI'm curious how much this affects the price. I'm not a homeowner any more, but when I was, I longed to replace my furnace with a ground-source heat pump. It is not too much of an efficiency win over gas for heating, especially since we used little heat, but it's great for cooling. But I was really put off by the price. There was no way to justify it even under the most pessimistic assumptions about energy prices, except perhaps if my furnace and AC were to break at the same time.
- Retric 8y agoI think cost is the biggest issue. If you want to reduce heating and cooling costs via investments then insulation + solar can cheaply make a huge difference. Ground source scales well if you have a large building and a large body of water near by then the payback time is short. But at single family home level it's just not that useful.
- sdhgaiojfsa 8y agoThat's not what my analysis showed. It has a payback period of 5-10 years depending on your assumptions, assuming new construction. Shorter period the more extreme the climate, longer in places like Norcal. Retrofitting though is a different story (higher cost -> longer payback).
- Retric 8y agoIf your further north compare it to solar hot water heater systems which cost ~3.5k self installed about double for someone else to add it to new construction. Further south solar systems have below your 5-10 year payback period.
- schiffern 8y ago> Ground source scales well if you have a large building and a large body of water near by then the payback time is short. But at single family home level it's just not that useful. There is a way: open-loop systems. A few years ago we installed an open-loop ground source heat pump (ClimateMaster brand) for under $6k. Water at 50F is drawn from a preexisting 15 gpm/50 foot well, through the heat pump unit, then dumped in a dry well at around 40F. It uses half a million gallons of water a year (costing <$30 in electricity), but of course there's no aquifer depletion, and closed-loop systems also use energy to pump water. This unit also pre-warms hot water at its coefficient of performance (about "600%"), reducing electric DHW costs. We homeowner installed, so we weren't eligible for NYS incentives. But it cut our annual bill in half vs. the previous heating oil furnace, with a payback period of 5-8 years.
- Retric 8y agoThe comparison for NYC is a solar hot water heater system which provides ~100f hot water and cost around 3k. You don't directly save on cooling costs, but as heating costs dominate and you get much warmer hot water that's worth it. Relative net savings depend on getting a system sized for your use, and how much cooling you use in the summer. But, you can also add solar panels for summer use with the overall value balancing over the year.
- schiffern 8y agoUnfortunately my site is much too shaded for solar. Already tried that. For clarity, my system provides both water heating and space heating/cooling.
- DannyBee 8y agoDrilling is about half the cost. It's fairly cost efficient if they do it when building the house, much less so otherwise. It's basically "free" if your house needs a well anyway. (this assumes a lot about the ground under your house but it's relatively true ;P) If you live in a mild climate, you are just not going see a lot of payback because as you said, you don't spend a lot. Note: Most of them also provide hot water, not just heating and cooling But all told, the path to making it popular would be to make it part of new construction. I understand why they want to try to make retrofitting cheap, but it's just not even close right now.
- jaclaz 8y agoWell, that is what they say (without telling anything about the actual drilling method). A typical water well drilling machine is on the back of a large truck and will bore a 30-40 cm hole for (prices here in Europe) 80-90 €/m. There are smaller drill rigs (nothing that actually needs to be invented, only "normal" micropiling rigs) that can bore 10-20 cm diameter holes for a price of 60-70 Euro/m. Let's say you need two holes 80 m deep, at 20 €/m difference (80-60=20 or 90-70=20): 28020=3,200 which represents roughly 10% of the actual price for the dandelion system (the real, not subsidized price) of 35,500 US$. A typical small micropiling rig has a boring rate of around 100 or maybe 120 m per day so either they are really using a new, ultrafast technology (which I personally doubt) or are using less deep bores, and in any case the depth depends on the geology of the site, so everything is probably "averaged". A geotermic pump with inverter with 20-30 kW of heating/refrigerating power should be around 15,000-18,000 € so, without more data 30,000 € or 35,000 US$ don't seem such a breakthrough (most probably they have huge savings due to the "massive" scale of operation, instead).
- raverbashing 8y agoDoes it really need to go 80m deep? Seems like a very deep hole They're probably looking at a width of 10cm tops from their description.
- jaclaz 8y agoIt depends on the geology underneath (I have no idea what is under the area they are currently covering) the amount of heat exchange can vary a lot, even within the same type of soil/rock. As well the diameter of the bored hole implies a given diameter of the inner pipes, and they have obviously different thermal exchange capacity, though you can use smaller pipes using higher pressure in them. Here there are some "generic" references (it is the site of an Italian firm that builds geothermal inverters, their English could be bettered): http://en.rossatogroup.com/guide/pompe-di-calore/pompe-di-calore-geotermiche/126-come-realizzare-un-impianto-geotermico-con-pozzi-verticali.html http://en.rossatogroup.com/guide/pompe-di-calore/pompe-di-ca...
- 8y ago
- EADGBE 8y agoReduced cost, but still the expense of a ground-source setup (20k is quoted in article).