4 ms·
I assume you want to move the cold air in and the warm air out. How to best achieve that completely depends on the shape of your room and the holes to the outsi
by adrianN 8y ago
I assume you want to move the cold air in and the warm air out. How to best achieve that completely depends on the shape of your room and the holes to the outside. You should probably do some computational fluid dynamics on a model of your place to see which blowing direction works better. It probably works best if you have separate inlets and outlets for the air that are maximally far apart, like on the ceiling and in the floor.
- perl4ever 8y agoI agree on "maximally far apart", but more in the horizontal than the vertical direction. Extract hot air in one location, preferably up high, and let cold air in with a window that is as far away as possible - it doesn't really matter high or low.
- roel_v 8y ago"You should probably do some computational fluid dynamics on a model of your place" Oh great, there goes my Monday. Thanks buddy.
- namibj 8y agoCan you recommend any specific software? I'd finally have a reason for the 3d-scanner in my phone... (getting the model at a suitable resolution of <3cm voxel-cube size to not have to model it all from hand)
- bkanber 8y agoOverkill for the hobbyist, but ANSYS products like Fluent and CFX are what the professionals use. Quite pricey though.
- namibj 8y agoYeah, if I had the money for such software, I wouldn't need to ask. I'll assume you don't know any affordable substitute.
- l1n 8y agoOpenFOAM might work for this purpose.
- ss64 8y agoIf you look at the design of windows on old houses from about 1700 to 1940 they facilitate exactly this. They open at the top and/or bottom to allow the circulation of air. Hot air will naturally rise and exit from the high up window. When air conditioning took off in the 1950s this became less important.