3 ms·
Well that felt like a tease. They're using silicon carbide and... That's all the detail she wrote.
by shakna 9y ago
Well that felt like a tease. They're using silicon carbide and... That's all the detail she wrote.
- BostonEnginerd 9y agoSiC and GaN are being used for a fair number of parts these days for RF applications. It seems that the novel part of this paper is that the device worked up to 500C. The device worked for 3 hours with some degradation, likely due to Al electromigration from the metallization. The acutal paper is here: https://ieeexplore.ieee.org/document/8345290/ https://ieeexplore.ieee.org/document/8345290/
- namibj 9y agoI thought >300C power MOSFETs in SiC were already commercially available? But I might be confused.
- darkmighty 9y agoI wonder if simply cooling isn't an option in those applications? I guess that'd depend on the chips power output. Otherwise you could just surround it in a really good insulator and pump residual heat out somehow (maybe can peltiers withstand such high temps using multiple stages?)
- BostonEnginerd 8y agoCooling only works if you have somewhere to put the extra energy. Peltiers are inefficient to run and generate a ton extra heat. It's best to build something that can run with as little support needed.
- darkmighty 8y agoIndeed, cooling would be quite bulky and require lots of extra energy. But for an environment like Venus cited (instead of small sensors), I think it should be a good option. The Carnot efficiency to cool from a Venutian environment (462C) down to 50C (reasonable chip temp) is a surprisingly good ~60%. In practice you might get 15% (? plus insulation leaking), that should still allow cooling a chip of less than ~1 watt of tdp without too much hassle inside a robot.
- madengr 8y agoI was going to say my employer made this stuff, but they are getting out of the business. Must not be profitable enough. https://aerospace.honeywell.com/en/products/navigation-and-sensors/high-temperature-microelectronics https://aerospace.honeywell.com/en/products/navigation-and-s... SOI is an excellent RF process, and is what would be needed to get the rest of the radio on there.