2 ms·
Have you looked at the current requirements for CPUs and GPUs? We're talking 100A or more. Even if the input was 3.3V, which it isn't, a linear regulator down t
by magicalhippo 9y ago
Have you looked at the current requirements for CPUs and GPUs?
We're talking 100A or more. Even if the input was 3.3V, which it isn't, a linear regulator down to 1.1V would have to dissipate 220W or more. You'll need a bigger heatsink for the linear regulator than for the CPU...
And designing a 250W-capable linear regulator is not as simple as just hooking up a LM7805.
So with a modern CPU and GPU, your talking ~400W of power to the actual components, and nearly 500W wasted in the linear regulators. This of course also means you have to get a 1000W PSU as a bare minimum.
- hatsunearu 8y agoHere's the problem: not only do you have to dissipate 200W+ for your pass element, you need to drive it ultra fast with an extremely fast analog circuit that can withstand the massive magnetic fields (which pretty much means you need a PCB). Yeah and good luck driving a 200W linear element (if it even exists, lol) with a few op amps--the driver which should deliver a few amps into the gate/base of the pass element, which in and of itself is a pretty difficult challenge.