4 ms·

Not really. More likely just desoldering a couple of key components and soldering in a few wires to a dsughterboard with a linear regulator. A year’s worth of

• magicalhippo 8y ago
  Have you looked at the current requirements for CPUs and GPUs? We're talking 100A or more. Even if the input was 3.3V, which it isn't, a linear regulator down to 1.1V would have to dissipate 220W or more. You'll need a bigger heatsink for the linear regulator than for the CPU... And designing a 250W-capable linear regulator is not as simple as just hooking up a LM7805. So with a modern CPU and GPU, your talking ~400W of power to the actual components, and nearly 500W wasted in the linear regulators. This of course also means you have to get a 1000W PSU as a bare minimum.
  • hatsunearu 8y ago
    Here's the problem: not only do you have to dissipate 200W+ for your pass element, you need to drive it ultra fast with an extremely fast analog circuit that can withstand the massive magnetic fields (which pretty much means you need a PCB). Yeah and good luck driving a 200W linear element (if it even exists, lol) with a few op amps--the driver which should deliver a few amps into the gate/base of the pass element, which in and of itself is a pretty difficult challenge.
• hatsunearu 8y ago
  old thread but LMFAO you can't be any more wrong. You need /much/ more careful design to get GPU-compliant performance. The dI/dt on modern ASICs are insane, and you need an insane regulator to deal with it.