5 ms·
I suspect that aside from tamper proof designs, most screw head development is driven from the manufacturing or assembly side. After all, most screws will never
by analog31 9y ago
I suspect that aside from tamper proof designs, most screw head development is driven from the manufacturing or assembly side. After all, most screws will never be unscrewed.
- TeMPOraL 9y ago> After all, most screws will never be unscrewed. That's because they don't want you to unscrew them. There's a bit of a feedback loop here - the less user-serviceable stuff you make, the less users expect to be able to fix things themselves, so there's less need to make next things user-serviceable.
- agumonkey 9y agoTotally. I'm a bit shocked how effective this is. For years the sight of a torx or rarer socket would stop me from even thinking about opening a device. I don't know if it was impossible to find before but today you can buy most heads easily. And when you think about it, it's just a damn contact surface for a lever.. don't stop (unless there's a real safety hazard)
- TeMPOraL 9y agoSame here. The first couple of years I encountered torx sockets, I called them "those ones they put to prevent you from repairing things". The drivers weren't impossible to find, but they also weren't commonplace. It was doubly annoying when I had devices that had regular cruciform sockets (that I could even handle with a knife if in a hurry) on the outside, but then suddenly torx sockets inside.
- agumonkey 9y agooh yeah the partial disassembly is frustrating after a year of toying with devices and watching people on youtube I'm a lot more unorthodox.. anything goes as long as it's not too stupid. Yesterday I used a knife and a wrench to open a braun toothbrush.
- TeMPOraL 9y agoI never held back much when fixing my own stuff either. But it's a different game when I'm fixing things for someone else (e.g. a friend or family member) - then I really don't want to break or even scratch anything.
- agumonkey 9y agoTrue. Recently I found a lcd tv outside, turns out one chip was partially failing, now it seems stable. Then my neighbor told me it was hers, which was a bit fun and awkward; but to be honest, had they ask me to fix it I would never have touched it. It's easier when it's considered trash and nothing to lose.
- dotancohen 9y ago> Then my neighbor told me it was hers That is when you thank her for putting it out nicely instead of banging it up some more, implying that she did mean for someone else to come along and adopt it.
- lsc 9y agoI find this to be really weird... Anyone who has worked on vehicles knows the importance of getting the exact right tool to unfasten a fastener (and the... consequences of using something that "almost works" - usually meaning you have to spend hours trying to get the fastener out) I mean, sure, you need tools to open things up... but the right bit is about a thousand times more important than an expensive bit, and for $10, you can get a huge assortment of cheap bits that are good enough for the home gamer. This always baffled me about the apple pentalobe haters... I mean, using a different screwdriver head is not the unfriendly part of taking an apple apart. The glued-in bits are the unfriendly part.
- TeMPOraL 9y ago> Anyone who has worked on vehicles knows the importance of getting the exact right tool to unfasten a fastener If you're a pro auto shop, you can probably get your hands on all of the exactly right tools. If you're an individual, it's another story... It's a matter of lag in the supply/demand loop. The moment Apple introduced pentalobe screws, or in general, the moment a different company introduces an unusual screw head, is the moment when you're very unlikely to be able to get your hands on appropriate drivers. As more and more products use the new head, the demand becomes big enough that eventually, appropriate drivers get available and cheap. From what I've seen, this can take years - longer than the lifetime of the first iteration of a product using the new screws. Enough to destroy end-user repairability for a whole category of products. After a while, the company will change screw heads again, rinse and repeat. And the glue. That's just companies being assholes. (Yes, I know there are technical benefits of using glue. They're especially pronounced if you don't consider end-user or third-party serviceability in your design process, and even more so if you explicitly try to eliminate it in your business strategy.)
- lsc 9y ago>If you're a pro auto shop, you can probably get your hands on all of the exactly right tools. If you're an individual, it's another story... Meh, I'm mostly talking about getting the right socket for the job... I mean, don't use the ASE socket that is almost the same as the metric bolt you are working on, go down to the hardware store and get the right tool. That's the thing about automotive work; as far as I can tell, automotive tools are very widely available and cheap, compared to other tools I've worked with, and not only that, but you go to the auto parts store, and the people are helpful and knowledgeable. I mean, if I need some SAC305 on the weekend, well, fry's might have that, maybe, but nobody there will know the difference between SAC305 and sn99. If I need any sort of server-grade parts, I'm almost certainly stuck waiting for monday. Fry's has a very small selection of ECC memory or enterprise-grade disks, for example. And you aren't going to have a Fry's in a small town, but you will have a Napa auto or similar. I mean, part of it is that I know a fair bit about computers and really not all that much about cars, but when I show up even at the chain auto parts stores, they can answer even relatively difficult questions. This is not, in my experience, true of Frys. When it comes to tech support, be it a computer or a car that needs fixing, the difficulty of a question is directly proportional to it's vagueness. Newbies are more likely to ask difficult questions than more experienced and knowledgeable people who actually know enough to tell you what the actual problem is.