3 ms·
I can confirm from experience that if you apply too much voltage it takes on that “never going to work again” smell :-)
by ChuckMcM 9y ago
I can confirm from experience that if you apply too much voltage it takes on that “never going to work again” smell :-)
- nfriedly 9y ago"All diodes can be light-emitting - once"
- femto 9y agoFunnily enough, all diodes actually are light emitting, and light receiving, to some extent. It's why diodes are generally in opaque encapsulation. Whether a PN junction is an LED, PV cell or rectifier/switch is a matter of what the design optimises for. Try putting a voltmeter across a glass encased signal diode and shining a strong light on it to see it act as a PV cell. One wouldn't normally use a diode as a PV cell, but if the desired power was very small, a glass encased diode might be used as a cheap PV cell.
- kylek 9y agoThat has a name, too- https://en.wikipedia.org/wiki/Magic_smoke https://en.wikipedia.org/wiki/Magic_smoke
- rdtsc 9y agoFrom tinkering with electronics my brain has imprinted the smell of various components (resistors, capacitors), isolation. I often wonder what effect inhaling those fumes had on me, can't imagine it was a positive one.
- paulsutter 9y agoOf course chips don’t work if the smoke escapes, internally they operate on smoke. We tested this with a chip socket connected to 120VAC. All the chips that we connected released smoke, and none of them ever worked again.