3 ms·
network engineer here: nobody connects a 200 or 400GbE interface linecard off a router to a single anything... The purpose is for ISP-to-ISP interconnections fo
by walrus01 9y ago
network engineer here: nobody connects a 200 or 400GbE interface linecard off a router to a single anything... The purpose is for ISP-to-ISP interconnections for truly huge amounts of traffic. For example direct peering in the same IX/carrier hotel between a huge source of content (youtube/google, netflix, etc) and a huge ISP (comcast, centurylink).
For a big ISP, also things like 100GbE connections from a city's pair of core routers to slightly smaller aggregation routers.
edit: I don't know that anything "consumes" data in the way that the questioner is asking. It's more about the aggregate amount of data. One netflix 4K stream to an xbox one s is about 15.75 Mbps. Now multiply that by a hundred thousand netflix subscribers in a typical comcast service area, any of whom at any given time might be sitting around and watching Altered Carbon or Breaking Bad.
- jandrese 9y agoThe only potential consumers I can imagine are like the Great Firewall of China traffic monitoring systems.
- icebraining 9y agoOr the NSA: https://en.wikipedia.org/wiki/Room_641A https://en.wikipedia.org/wiki/Room_641A
- Retric 9y agoRaw high frame rate video can into that range. Phantom v2640 for example does 6600 frames per second at a at 2048 x 1952 resolution = 26 Gpx/sec or something like 100Gbit. Currently they simply buffer everything on Camera and use 10GigE, but in theory they could look into 100+GbE connections for newer designs.
- walrus01 9y agoupcoming on-camera flash memory interface https://en.wikipedia.org/wiki/CFexpress https://en.wikipedia.org/wiki/CFexpress basically a way of putting a M.2 interface NVME PCI-Express SSD into a camera. https://petapixel.com/2018/04/09/prograde-digital-unveils-worlds-first-1tb-cfexpress-card/ https://petapixel.com/2018/04/09/prograde-digital-unveils-wo...
- Retric 9y agoAccording to the link that's currently limited to 2 GB/s which far to slow to use for this. Phantom v2640 needs ~50+x that speed to do it in real time and I assume the bandwidth needs will keep increasing on the next model.
- walrus01 9y agoSo what storage device does it use currently? except for RAM, there is not much faster than a NVME based, PCI-Express 3.0 x8 interface SSD. If it's some truly ridiculous bitrate it probably uses proprietary packs of RAM with battery backing.
- Retric 9y agoOk, found more info on that model right now it's got up to 288 GB of internal RAM. At 12 bit per pixel which is lower than I thought that lasts 7.8 seconds for ~40Gbit/second. Anyway, as this is all internal so they have a lot of options.
- walrus01 9y agoyeah, if we're talking about RAM, there is still a significant difference in MB per second write ability for something like DDR4-3200 vs even the best NVME pci-express flash-based SSDs.
- kijiki 9y agoCumulus (disclaimer: I co-founded it) has customers that use these: http://www.mellanox.com/page/products_dyn?product_family=260&mtag=connectx_5_en_card http://www.mellanox.com/page/products_dyn?product_family=260... to dual 100G attach their servers to a pair of ToR switches. As a result, they'd really love to have something faster than 100G for their ToR to spine uplinks, but that isn't quite available yet. Insanely (and awesomely), Mellanox already has these: http://www.mellanox.com/page/products_dyn?product_family=266&mtag=connectx_6_en_card http://www.mellanox.com/page/products_dyn?product_family=266... dual 200G NIC.
- walrus01 9y ago100G NICs and dual port of the same version are a really good argument for the need for more pci-express 3.0 lanes in single socket servers. The AMD epyc is a step in the right direction. If you assume a server that might have two m.2 nvme SSD in it, those take up lanes, and then the nic will eat an x16 interface.