4 ms·
You can't see the cpu address bus from a pci(e) card sadly.
by fulafel 9y ago
You can't see the cpu address bus from a pci(e) card sadly.
- jacquesm 9y agoAh yes, of course, it's more like a bunch of serial links. Ok, how about a vacant RAM slot then?
- rbanffy 9y agoWell... Each board had 32 LEDs (the top 16 were doubled, I don't know for what), each cube had 16 boards, 8 on one side, a couple in the middle without LEDs and doing communications, IIRC, and 8 more on the other side. Not sure it had LEDs on the back cubes. I'm seriously thinking about building a cluster of ARM-based thingies and use LEDs controlled from each node to show usage of cores, NEON lanes (patching the Ne10 library) and so on. There are some octa-core big.LITTLE (I forget the new name) boards that would make the carrier boards simpler (only 4 per carrier needed, considering CPUs alone). The boards themselves would be simple, having only LEDs connected to the GPIO pins and power being fed to the nodes, which would be wired together using ethernet. Another, way cooler but waaaaay dumber (because it'd be a shitload of work for me), would be to design a board around an ethernet switch and a bunch of Octavo SiPs (or, maybe, some Pi-like CPU Soc with PoP RAM on top, provided it has ethernet on board to reduce chip count). Having everything on a single board would avoid PHY transceivers and reduce board complexity, but it still would be a ton of work for someone who hasn't designed a PCB since the dawn of the SMD era. Also, the Octavo parts are single core and we'd need 32 of them per board to light up 32 LEDs in a meaningful way. I'd rather restart my hardware engineer career with something less megalomaniac. The final, laziest, approach would be to get a cluster board and 7 SOPINE modules from the fine people at Pine64 and wire their GPIO lines to a couple LED matrix modules. With 28 cores per board, the use of 28 of the 32 lights would be simple to figure out, but we'd need something for the other 4 LEDs (2 could be from the on-board ethernet upstream port, but 2 still remain. Also, since the SOPINES stand perpendicular to the cluster board, spacing would be very tight.
- jacquesm 9y agoThat'd be one very impressive lightshow :)
- voxadam 9y agoReplace the LEDs with laser diodes if you want something truly impressive.
- rbanffy 9y agoI don't want to get killed while running benchmarks.
- rbanffy 9y agoI definitely need to negotiate a bigger home office with my wife...
- jacquesm 9y agoNot sure if this will help but you can tell her that you have my vote ;)