5 ms·
526 Watt/cm³? How should I interpret that? I doubt it’s by the volume of the stuff covered with the film; it seems way too high for that (that would freeze wate
by Someone 9y ago
526 Watt/cm³? How should I interpret that? I doubt it’s by the volume of the stuff covered with the film; it seems way too high for that (that would freeze water in seconds, if I’m not mistaken)
The best I can think of is that it is by the volume of the film, but I find that a weird way to express it, as it would seem to imply there’s little difference between a thin film over a large area and a thicker one over a smaller one.
But let’s go with that. Assuming a film thickness of 100nm (article says “50-100nm thick”) = 10^-7m = 10^-5cm, one would ⁿ eed an area of 10⁵ cm² = 10 m² to get that 526 Watt of power out. Still seems high. If that’s how to interpret that number, what kind of stuff do I need to cover with this film for that to happen?
- trumped 9y agoThere might be an optimal thickness... a very thin film can't absorb much thermal energy, for example
- pjc50 9y agoThat is for the volume of the film, yes: (via scihub) "PMN–0.32PT thin films are shown to provide record-breaking pyroelectric energy con - version, including: first, the largest energy density of 1.06 J cm − 3 (at Δ T = 90 K, Δ E = 267 kV cm − 1 and f = 40 Hz; Fig. 4a), which is made possible because of the large field-induced value of π and the ability to apply large electric fields maximizing the electrical work ( ∮ ⋅ EP d ). Second, the largest power density of 526 Wcm − 3 (at Δ T = 56 K, Δ E = 267 kV cm − 1 and f = 1,000 Hz; Fig. 4b) that is real - ized because the power density scales directly with cycling fre - quency, which can be increased because the thermal time constant of the thin-film geometry is small." Note the operational constraints. You have to apply a varying electic field and a varying temperature.