7 ms·
For $5k, Chevy Will Let You Assemble Your Corvette Z06’s Engine Yourself (2015)
- skookumchuck 9y agoIt's pricey, but I love this. Now, if only someone would let me build a Merlin V12 :-)
- 13of40 9y agoHow about you buy it, I'll take it apart, and you can put it back together. Free of charge, even.
- madeuptempacct 9y agoI imagine the idea is that you can't mess it up, as you inevitably would following your strategy, costing you more than 5k in the long run.
- 13of40 9y agoThat was the joke. But in reality it would probably be a piece of cake if it was a new car and you had access to all of the custom tools. An older car with frozen bolts, charred head gaskets, etc. is a different story.
- lostlogin 9y agoThough with an old car there is a moderate chance of you being able to reach the right nut and possibly even stand on the ground in the engine bay.
- madeuptempacct 9y agoThat was a LONG time ago. The last car I saw like that was probably from the 60s, aside from some American trucks.
- rmason 9y agoMy taste runs more to Mustang's, I'd seriously consider buying a Shelby Mustang if they'd let me build the V-8. I'd have no problem flying out to Las Vegas to do it.
- mulmen 9y agoI had the opportunity to attend a series of private classes at a local air museum. One of the sessions covered the engines in the planes and how they are maintained today. The class format included a lecture and a hands-on exercise. The hands-on exercise that night was a cam and rocker arm "replacement" on the museum's Merlin engine. Someone else got to tear it down but I got the chance to reinstall the cam and rocker arms. It was on a cutaway display engine so it will never fly of course but still, it was a wonderful experience. I can honestly say that I have installed the cam and rocker arms on a Merlin. Not many people can do the same :)
- dotancohen 9y agoI'd personally go for the Vacuum Merlin myself. 900kN of thrust, and when the bell cracks you can just cut off the cracked part!
- larrydag 9y agoI visited the Bowling Green, KY factory for a tour. It is one of the most interesting tours I've ever attended. Some other tidbits about the Engine Build. You get to build as much or as little as you want of the engine. They'll put a metal decal on the engine saying it was built by the owner with your name. Also if you visit the factory make sure you visit the Corvette museum across the road. The most interesting thing about that museum is a good section of it was swallowed up by a sinkhole. Many corvettes were swallowed up. Most were restored but several were totaled to disrepair. You can see them on display and shed a tear. There is a good section of the museum dedicated to the sinkhole mishap.
- skookumchuck 9y agoIt's the generic trouble with museums - concentrating all the irreplaceable stuff in one location. Like the Library of Alexandria.
- adamsea 9y agoWhich can also be a problem with Libraries.
- goldenkey 9y agoHerman Goring and other Nazis pillaged the Louvre once France surrendered. Many of the pieces were found in their personal homes after the war but many went unrecovered. Aye..
- labster 9y agoThe alternative is that information is not discoverable, like old letters found in attics and ancient Egyptian tombs. Finally, with the advent of a the digital age, we can make data easy to find and have off-site backups. Still no good solution for physical artifacts, though.
- magduf 9y agoYep, but there aren't any good alternatives. Locking things up in private collections doesn't help society, and doesn't let professionals manage the relics and also ensure they're genuine, and research their place in our history. What should be done is to make sure museums are located in extremely safe places, both from natural forces (like sinkholes, hurricanes, etc.) and also from political problems (this means putting valuable artifacts in certain countries is probably a bad idea).
- userbinator 9y agoThere's an interesting contrast between the (traditional) automotive and today's consumer electronics industries; ever since the early days of cars, manufacturers have tolerated and even encouraged the growth of a large aftermarket parts industry, to the point where you can build an entire "Chrysler", "Ford", or "GM" driveline from the engine to the wheels with entirely non-OEM parts. Of course, the manufacturers themselves will sell parts to anyone who wants to buy them. Contrast this with companies like Apple and Tesla, who attempt to maintain tight control over their products and use legal action against those who want to "open them up". (From what I've seen, European and Asian automotive companies are somewhat less open, but once again there is still a large aftermarket.)
- Digory 9y agoI've built my last few performance "Apples" almost entirely from non-OEM parts. Apple has been pretty lenient with the Hackintosh community -- but that may be coming to an end, if Apple moves away from intel.
- throwaway2048 9y agofor what its worth, automotive third party parts are protected by law in the USA due to similar shenanigans, back when the government wasnt quite so blatently pro entrenched interests.
- twostoned 9y agoYes and working on cars is a heck of a lot of fun as a result. Car modding and tinkering is a huge hobby and from what I can tell only supports these brands and the OEM sales. You need a Chevy in the first place to outfit it with 3rd party high perf parts. Something will break as a result and you'll be back buying more parts and investing even more in the GM/Chevy ecosystem. It's the opposite of how record labels try to attack music 'pirates' who also tend to spend more on music too. (Perhaps their love of music is what correlates high piracy and high purchasing? Hmm) It adds to the romanticism and involvement. The original GT40 Le Mans car from the 60s that originally beat Ferrari was built from parts that you could go to your local Ford dealer and order. Maybe I'm wrong but I think that if you had enough money at the time you could actually buy all of the parts to build the same .427 they were using in the professional races. Pretty cool.
- matte_black 9y agoDoes it hurt resale value if an engine was “owner built”?
- exikyut 9y agoMy guess is the plaque and "professional photos" are a way of demonstrating that adequate and appropriate levels of attention have been paid to detail - and also politely but firmly making the statement "now be nice and just fix this." So yes and no. It will probably depend on a given recipient/vendor/repairer/whatever values making a fuss of the customer over plain technical competency or not. For want of a better want to articulate this, I've just realized that it probably happens all the time for people with tons of money to like "helping" with things, and cause irritating damage in the process. (And that's not including every-day micro-manglement in some large proportion of work environments everywhere in the world... or the client horror stories everyone has...)
- cfadvan 9y agoIt probably can’t hurt the value more than the price of the engine itself. It’s not like a kit car, where you have to worry about the entire body and drivetrain, it’s one (very critical) component which can be yanked and replaced or rebuilt. I suppose if someone really borked it, it might hurt the value of the transmission as well?
- bluedino 9y agoYou can’t really mess it up - it’s an assembly line process like everything else. You’re not even turning single bolts like you would at a hot rod shop, they have all the tools for each station calibrated for that certain part. Check out the Tonowanda engine plant online
- analog31 9y agoWith such a fast car, I'd be more worried about "owner driven." ;-)
- exikyut 9y agoI look forward to people doing this and putting the photos and (presumably) video online!
- jballanc 9y agoIt's not quite the same, but each year Hendrick Motorsports and Automotive group have an engine building competition. You can watch some of the builds on YouTube: https://www.youtube.com/watch?v=nn1E9HgEaKo https://www.youtube.com/watch?v=nn1E9HgEaKo
- chrissnell 9y agoWhen I did the rebuild [1] of my 1987 Land Rover Defender 110, I did it through a shop that ran a special program where owners could rebuild/repower their Defenders under the tutelage of the shop owner. In fact, the build was so dependent on my labor that I, as the customer, had to sign a contract that I would complete my part of the bargain in a timely manner or else I would have to pay him his hourly rate to complete it for me. It turned out to be an amazing experience. I stripped the truck down to a bare frame and built a brand-new rolling chassis [2] with new motor [3], transmission, transfer case, and suspension. I moved the old body over onto the new chassis, which gave it a sort of retro look with proper period-correct gear but the reliability of all-new parts. The shop owner was there to direct me what to start on next, to answer questions when I got stuck, and to help me lift the really heavy things, but for the most part, I wrenched alone. Over eight weekends of work, I went from knowing how to do only the most basic of maintenance (oil changes, etc.) to being quite confident that I could do another project just like this entirely on my own. The cost was about the same as paying someone else to do the work but I can be confident that everything was done right--every bolt torqued correctly, every dirty thing cleaned, every broken thing replaced. I take my truck out to the desert for multi-week camping trips and the experience gave me much-needed confidence in my ability, my tools, and my gear. [1] https://www.flickr.com/photos/defender90/albums/72157640704807135 https://www.flickr.com/photos/defender90/albums/721576407048... [2] https://www.flickr.com/photos/defender90/13052224614/in/album-72157640704807135/lightbox/ https://www.flickr.com/photos/defender90/13052224614/in/albu... [3] https://www.flickr.com/photos/defender90/12399960314/in/album-72157640704807135/ https://www.flickr.com/photos/defender90/12399960314/in/albu...
- adanto6840 9y agoI'm super intrigued by this -- almost surely over my (non oil-changing) level by far, but would still be interested in more info on it. Is it something that is advertised by the shop? In what location (or region) was this? What was the expectation in terms of timeframe, and how many hours were you typically putting into the project in any given week? If you're comfortable, shop info/specifics would be great but no worries if not. Awesome outcome BTW, and is something you can be very proud of and continually enjoy -- love it!
- csours 9y agoDoes anyone know why "hand-built" is a desirable quality for an engine? Several automakers advertise this for their top-of-the-line vehicles. I know it makes for very good marketing, but is that it?
- jac_no_k 9y agoParts matching. Example, while the block and pistons are made to within tolerances, it's possible to put together an engine with parts that mate well.
- nimbius 9y agospeaking as a former drive train and engine mechanic for a luxury dealership, this is a bad idea at best. Granted, the LS series engine is just a simple pushrod iron behemoth, you're still asking for trouble. My last place of employment wanted to do something similar, but it was shot down by the owners once they determined that practically every shop insurance provider flat-out said no. That $5000 fee is likely just for OSHA and your insurance company to look the other way in a state where regulations arent so stringent. All of us as vehicle techs also said no. The average luxury customer isnt qualified to do much more than sit in the waiting room and watch an episode or two of Ricky Lake. Luxury customers betray an absolutely criminal lack of self control sometimes. Ive had customers wander back into the shop to stand over my shoulder demanding to know everything im doing and why. Ive had an old persian customer who demanded to drive his car home that day and wouldnt leave the shop until I completed the week long work. Ive also had wealthy couples leave their kids in the car. Another customer demanded I never drive the car or sit in it. Point being: anyone stupid enough to waste $5000 on the chance to work on an engine they couldnt possibly understand on their own, isnt going to be someone you want in a shop. Dynastic wealth leaves you with a Reaganomic level of competency. The z06 is only an $84,000 car, but If i were the mechanic who had to deal with $5000 tourists chasing piston return springs across the shop floor and pulling main bearings out of their kids mouths, I'd do everything I could to find a new job.
- ggg9990 9y agoThe Corvette isn’t a “luxury” car like a Mercedes S-Class, even though it’s in the same price range. It attracts a different group of people and those who pay for this program and go to Kentucky for a weekend are probably >80% going to actually try to at least learn from it and assemble it correctly. After all, it’s going into their own car. I bet they do get some terrible customers but that’s what the $5,000 is for — to make it worth it for them.
- linsomniac 9y agoTell it to Tavarish ( https://www.youtube.com/watch?v=fuaOvUJOMa4 https://www.youtube.com/watch?v=fuaOvUJOMa4 ). :-) This isn't targeted at the "average luxury consumer", it's targeted at someone who is willing to spend $5K to do this as a vacation. I used to see a lot of Corvettes at the autocross events, and that average owner knew more than a thing or two about mechanicals. Now, if this program was "You can SAVE $5K by assembling your own engine.", you are probably going to get a lot of idiots. The people willing to pay $5K are probably going to be intense enthusiasts, and in my experience those people could do this job. Not all of them, of course. The kids that brought a GTR and a Sylvia to the track for open track day, and then proceeded to be trounced by pretty much everything else on the track, I wouldn't want putting together my engine. :-) They weren't happy at not being able to keep up with Miatas in the hands of very skilled drivers with R compound tires. :-)
- rmason 9y agoHere's something I'm seriously tempted to do this summer. There's an auto museum near Kalamazoo that offers a course on how to drive a Ford Model T. I have no problem driving a traditional stick shift, but the Model T has three levers on the floor and two on the steering wheel so it's a challenge! https://www.gilmorecarmuseum.org/education/model-t-driving-school/ https://www.gilmorecarmuseum.org/education/model-t-driving-s...
- tehlike 9y agoFactory five and superformance kits, i hear, are kind of a good experience to complete.
- pjc50 9y agoIronic that the DIY option is more expensive. I'm reminded of the British "kit car" scene, which started as a tax dodge for the Lotus 7: https://en.wikipedia.org/wiki/Lotus_Seven https://en.wikipedia.org/wiki/Lotus_Seven "Under the Purchase Tax system of the time cars supplied as a kit (known as "completely knocked down" or CKD) did not attract the tax surcharge that would apply if sold in assembled form. Tax rules specified assembly instructions could not be included, but as the rules said nothing about the inclusion of disassembly instructions, they were included instead and all the enthusiast had to do was to follow them in reverse.[citation needed] However, once the UK joined the EEC on 1 January 1973, the VAT system was adopted instead so the tax advantage of the kit-built Lotus Seven came to an end." The car is still sold as the Caterham 7, still available in kit form.
- csours 9y agoFYI, Auto manufacturers still have S/CKD plants, where a previously assembled vehicle is re-assembled. https://en.wikipedia.org/wiki/Knock-down_kit#Automotive https://en.wikipedia.org/wiki/Knock-down_kit#Automotive
- tomcooks 9y ago> Pay more to mess with the product you are buying and be able to brag about it at the pub! Why not buy it used and fix it yourself? Cheaper, more fun, puts hair on your chest, gives you proper bragging rights, puts marketing departments in their place
- userbinator 9y agoThe cost could be considered as paying for the training and use of their facilities, since it's not a "here's a room full of parts and the manual, now do it yourself" type of thing.
- bitL 9y agoHow about assembling a complete kit car, like K1 Attack?
- BillyParadise 9y agoDidn't they do this on Gas Monkey?