3 ms·
I recently built a Skylake PC and the CPU doesn't have any pins on it - just pads. The motherboard has springy contacts that the CPU rests against. You still h
by LeoPanthera 9y ago
I recently built a Skylake PC and the CPU doesn't have any pins on it - just pads. The motherboard has springy contacts that the CPU rests against.
You still have to clamp it down worryingly hard, but it doesn't go crunch anymore, and I think it's probably quite hard to damage the contacts.
- PascLeRasc 9y agoIt's been like that on Intel since at least 2006 with the release of LGA 771. AMD CPUS still have pins though.
- IceyEC 9y agoThe Threadripper I put in last week begs to differ
- jasonkostempski 9y agoNow when you hear crunch, it's coming from the flexing motherboard that's mounted on just 2 raised screw holes.
- penguinUzer 9y agoPro tip: Assemble the cpu/heatsink/ram/nve on the table surface then put the whole thing in the case. No flexing :)
- jowsie 9y agoThis has been my method for a while, but the last 2 PC's I've build have had fan/power connectors in places that I simply can't get my hand too once the board is installed, leading to me either pulling out case fans, or even CPU coolers, just to connect a 4 pin CPU power lead. Double check your hand will fit in the thing first!
- glandium 9y agoYou can still fuck up the connector on the motherboard, and consequently, the CPU. I'm speaking from experience: I had to replace a motherboard and a CPU. I still have the useless i7-870 as a sort of trophy of my ignorance of those pin-less CPUs (it was my first). Edit: actually, I remember now that the initial motherboard had a manufacturing problem on its socket, but as that was my first, I didn't know, and that led me to try and fail blatantly, killing both the motherboard and the CPU ; I only realized when seeing the new motherboard with a non-busted socket.