3 ms·
there are mirrors in the laser itself that don't end up as toast. Someone showed an industrial laser cutter to me once. He told me that: 1. The internal mir
by michaelt 9y ago
there are mirrors in the laser itself that
don't end up as toast.
Someone showed an industrial laser cutter to me once. He told me that:
1. The internal mirrors were about 5cm diameter, and water cooled.
2. The laser is only brought fully into focus at the final lens, just before the cutting point. So the beam at the mirror might have a 2cm diameter, before being focused down to a 0.5mm diameter at the cutting point.
Point 2 was also a key part of the safety system; the safety barriers could actually be quite thin, as the laser would be out of focus at that distance no matter how far wrong the optics went :)