5 ms·
I am always impressed at how people can buy a fully functional computer for $35. That said, as an engineer I often cringe at the compromises made. Like "Gigabit
by ChuckMcM 9y ago
I am always impressed at how people can buy a fully functional computer for $35. That said, as an engineer I often cringe at the compromises made. Like "Gigabit Ethernet over USB 2.0". Since the top bit rate of USB2.0 is 480Mbps and GbE is 1250Mbps, USB 2 only has about 1/3 the bit rate to support it.
Now it will be faster than 10/100 ethernet connections but don't expect to send a 100 megabytes/second through it.
- dtparr 9y agoSo, to be fair, they both refer to it as 'faster ethernet' to try to distinguish it from 'full Gigabit' and say explicitly in the post: > While the USB 2.0 connection to the application processor limits the available bandwidth, we still see roughly a threefold increase in throughput compared to Raspberry Pi 3B. And then show that they're typically seeing 314Mbps for TX/RX in iperf.
- Hello71 9y agowait, since when can gigabit ethernet transmit more than a gigabit per second?
- jwbensley 9y agoAre you referring to this? "GbE is 1250Mbps" 1.25Gbps is the "gross" bit rate for 1000BASE-T Ethernet. This is because it uses 8b/10b encoding on the wire (meaning there is a 25% overhead): https://en.wikipedia.org/wiki/8b/10b_encoding https://en.wikipedia.org/wiki/8b/10b_encoding 1000Mbps is essentially the "net" bit rate available to the Ethernet protocol.
- ChuckMcM 9y agoexactly right. Different standards claim different things, but ethernet tries to do the "right" thing and have the number in the name be the actual number of bits per second you get through the thing. Unlike say serial ports where 9600 bits per second isn't 1200 8 bit bytes per second, its only 960 8 bit bytes per second because of a start bit and stop bit. This can be even worse on serial protocols with forward error correction where up to a third of the bits going across the wire are for error correction and/or clock recovery.