4 ms·
Where does the "industry’s targeted $75 per megabit per second per month for dedicated bandwidth" figure come from? Is it a satellite industry figure, or submar
by fulafel 9y ago
Where does the "industry’s targeted $75 per megabit per second per month for dedicated bandwidth" figure come from? Is it a satellite industry figure, or submarine cable cost, or normal terrestial fiber haul cost, or...?
- walrus01 9y ago$75 per Mbps per month is a weird figure. If they plan to resell transponder kHz capacity on a commercial basis, the Mbps capacity will be a function of the modulation scheme/coding density that can be pushed through a link. Let's say I write them a check for $1500 a month worth of transponder frequency, FDD, and set up a 3.0m earth station on a roof in Cologne, Germany and another identical 3.0m terminal in Skardu, Pakistan. Both with modern SCPC modems. This hypothetical example assumes crosslinked spot beam coverage between the two regions and appropriate satellite position in the geostationary arc. The amount of Mbps I could push through that will be greater than if I do the same setup with a pair of 1.8m dishes. You can't know your Mbps figure for a dedicated geostationary satcom link until you know you RF link budget, system gain, and how close you can get to the Shannon limit. The same amount of kHz (same dollar spend per month) could be used at 16QAM 5/6 or at QPSK 1/2 modulations, with very different Mbps figures.